topic Re: Want to make irregular stair. in Revit Architecture Forum

Want to make irregular stair.

tw_you — Thu, 20 Jun 2024 07:47:01 GMT

I want to make irregular stairs, so please let me know. I can't think of any other way to do it. please help

Re: Want to make irregular stair.

vitorbortoncello — Thu, 20 Jun 2024 11:07:50 GMT

Use Create Sketch option, defining the boundaries, risers and stair path

Re: Want to make irregular stair.

ridantuo — Thu, 20 Jun 2024 11:36:37 GMT

You can also first model the stair and then convert it to a sketch based.

Re: Want to make irregular stair.

barthbradley — Thu, 20 Jun 2024 17:03:45 GMT

I don't know what you mean by "irregular stair", but Component Stairs can manipulated using their Shape Handles. Is this what you are trying to do?

Re: Want to make irregular stair.

SteveKStafford — Thu, 20 Jun 2024 21:26:08 GMT

For that kind of gallery seating/stair I'd be inclined to use Model in-place and create the extrusions in section and then extend them as far as they would go in plan. You could also use a stair the left lower run and another stair for the left upper run. Then use Floors for the other seating and "floors/landings" required. The stairs and floors will not "join" up nicely and look monolithic so that's why I'd be inclined to go with "in-place" modelling. That would allow all the elements to look as if it was built "together".

Edit: I think you could accomplish it with the stair tool using sketch mode and multiple runs with different riser counts and height offset. Might be "easier" in-place though.

Re: Want to make irregular stair.

tw_you — Fri, 21 Jun 2024 00:17:24 GMT

I've tried making stairs with sketches several times, but all of them have failed. I'll keep that in mind when I work !

Re: Want to make irregular stair.

tw_you — Fri, 21 Jun 2024 00:35:27 GMT

I didn't know I could fix it with a sketch after drawing! Thank you.

Re: Want to make irregular stair.

tw_you — Fri, 21 Jun 2024 00:37:03 GMT

Thank you so much! You helped me a lot.