topic Re: Tile Pattern - chevron 2" x 9" in Revit Architecture Forum

Tile Pattern - chevron 2" x 9"

Anonymous — Tue, 28 May 2019 02:05:52 GMT

Hello,

Can anyone help me create a custom .pat file for a chevron tile pattern (2" x 9")

I have written a .pat file for herringbone pattern but not sure how would a chevron work.

thank you

Re: Tile Pattern - chevron 2" x 9"

Anonymous — Tue, 28 May 2019 13:33:32 GMT

@Anonymous Have you tried the "PyRevit" add-in? It allows you create patterns by selection. 🙂

Re: Tile Pattern - chevron 2" x 9"

syman2000 — Tue, 28 May 2019 16:32:31 GMT

Here you go. You just need to add extra Revit Parameter for Model or Drafting

Re: Tile Pattern - chevron 2" x 9"

hugha — Tue, 28 May 2019 23:09:17 GMT

Try this, based on 9" side, 2" across, no gaps:

;-------------------------------------------------------------------------------
;        Written by HatchKit Professional
;        HatchKit Professional (c)1990-2019 Cadro Pty Ltd
;        www.hatchkit.com.au/
;-------------------------------------------------------------------------------
;-Date                                   : 2019-05-29
;-Time                                   : 09:04:49
;-HatchKit Version                       : 3.1.11.2776
;-HatchKit Output Filetype               : Revit with HatchKit Add-In
;-------------------------------------------------------------------------------
;%VERSION=3.0
;%UNITS=INCH
*chevron9x2
;%TYPE=DRAFTING
135,0,0,19,-1,9,-27
90,0,0,0,12.7279221
90,-6.364,6.364,0,12.7279221
45,0,0,19,1,9,-27

hth,

Hugh Adamson

www.hatchkit.com.au

Re: Tile Pattern - chevron 2" x 9"

Anonymous — Fri, 12 Jul 2019 18:08:58 GMT

Thank you so much, this works great.

Re: Tile Pattern - chevron 2" x 9"

Anonymous — Thu, 18 Jul 2019 00:50:09 GMT

could you also help create a .PAT file for a 9" x 36" staggered tile at an 45 degree angle .

Re: Tile Pattern - chevron 2" x 9"

hugha — Thu, 18 Jul 2019 03:53:22 GMT

9" x 36" staggered tile at 45 degree angle is somewhat ambiguous.

Re: Tile Pattern - chevron 2" x 9"

Anonymous — Thu, 18 Jul 2019 14:08:10 GMT

Its a Running bond pattern.

Each tile is 9" x 36".

See attached picture. Those are 9" x 36" tiles but I need to have them staggered.

Hope I make more sense.

Re: Tile Pattern - chevron 2" x 9"

hugha — Thu, 18 Jul 2019 15:41:52 GMT

That has very little to do with a thread topic regarding chevrons - and they don't come much simpler:

;%VERSION=3.0
;%UNITS=INCH
*36x9@45
;%TYPE=MODEL

45,0,0,0,9

135,0,0,0,36

Re: Tile Pattern - chevron 2" x 9"

Pattycake_Kyle — Thu, 18 Jul 2019 19:09:01 GMT

@Anonymous

Makes perfect sense! Here you go 🙂

You can rotate model patterns in Revit, so i included non-rotated and also rotated.

Non-Rotated: https://pattycake.io/pat/YlRMJNZowpA

Rotated: https://pattycake.io/pat/kRwAneZJqv3

Just click download at the top and import the PAT file into your revit.Nonrotated.JPG

Rotated.JPG

Re: Tile Pattern - chevron 2" x 9"

ToanDN — Thu, 18 Jul 2019 19:16:51 GMT

@Pattycake_Kyle wrote:

@Anonymous

Makes perfect sense! Here you go 🙂

You can rotate model patterns in Revit, so i included non-rotated and also rotated.

Non-Rotated: https://pattycake.io/pat/YlRMJNZowpA

Rotated: https://pattycake.io/pat/kRwAneZJqv3

Just click download at the top and import the PAT file into your revit.Nonrotated.JPG

Rotated.JPG

I think the top one is enough. Users can rotate model patterns to any given angle if they need to.

Re: Tile Pattern - chevron 2" x 9"

hugha — Thu, 18 Jul 2019 23:33:44 GMT

My bad, staggered is still very simple:

;%VERSION=3.0
;%UNITS=INCH
*36x9@45staggered
;%TYPE=MODEL

45,0,0,0,9

135,0,0,0,18,9,-9

Re: Tile Pattern - chevron 2" x 9"

Anonymous — Fri, 06 Sep 2019 16:58:32 GMT

I require a Pat file for 2 1/4" x 7 5/8" tile which is layed out horizontally on a running bond pattern.

See attached screenshot.

Thanks a lot in advance!! 🙂

Re: Tile Pattern - chevron 2" x 9"

Pattycake_Kyle — Fri, 06 Sep 2019 17:17:18 GMT

PS - Next time start a new thread/post --- I think mods might get made this thread is solved twenty times over and this request isn't related to herringbone.

As requested: https://pattycake.io/pat/Xl0vgKVg6Yd

Modular: https://pattycake.io/pat/8Ge5nGGRgdl

Verify settings on the left are correct and then click download (will download a .pat automatically).

I included a 'modular' sizing --- I assume you are doing standard brick for these requested sizes? So i'd encourage you to use the modular sizes instead of the 'as requested' since this will accommodate grout thickness of 3/8" (typical). And then you wont be off several inches off over the course of the facade/wall/whatever.

These are made using our Pattycake Template/Calculators (see image, top right panel) - so you if you need to adjust the values further, create an account and enable 'pattycake pro' under settings. All free for another couple of weeks during our last stages of beta testing. If interested, use code: "sprinkles19"

ExampleA

Re: Tile Pattern - chevron 2" x 9"

zeynep3KLJ6 — Wed, 18 Aug 2021 18:32:50 GMT

how do I do this for 16 x 4 ?

Re: Tile Pattern - chevron 2" x 9"

hugha — Thu, 19 Aug 2021 02:43:38 GMT

Fill in this HatchKit Quickfill form:

hugha_0-1629340817177.png

to obtain this:

;-------------------------------------------------------------------------------
; Written by HatchKit 4 Standard Edition
; HatchKit 4 Standard Edition (c)1990-2021 Cadro Pty Ltd
; www.hatchkit.com.au/
;-------------------------------------------------------------------------------
;-Date : 2021-08-19
;-Time : 12:33:15
;-HatchKit 4 Version : 4.1.3.3036
;-HatchKit 4 Output Filetype : Revit with HatchKit Add-In
;-------------------------------------------------------------------------------
;%VERSION=3.0
;%UNITS=INCH
*qf0,
;%TYPE=MODEL
45,0,0,19,1,9,-27
90,0,0,0,6.36396103
135,0,0,-19,1,9,-27

hth,

Hugh Adamson

www.hatchkit.com.au

Re: Tile Pattern - chevron 2" x 9"

seguraaDLWP2 — Wed, 11 Dec 2024 20:51:17 GMT

Is there a model version of this? this one is drafting.

Re: Tile Pattern - chevron 2" x 9"

henryrys — Fri, 21 Feb 2025 06:58:36 GMT

Can you help me create the Chevron pattern 8x47 & 4x21 files? Many thanks!

Re: Tile Pattern - chevron 2" x 9"

jorodriguezAPSQS — Mon, 22 Jun 2026 22:02:26 GMT

*PUNTA_HUNGRIA_370x160, Chevron 370x160mm a 45 grados
;%TYPE=MODEL
0, 0,0, 261.62951,226.27417, 0,-261.62951
45, 0,0, -160,160, 370,-226.27417
135, 0,0, 160,160, 370,-226.27417