topic Re: loft function does not work well in Revit Architecture Forum

loft function does not work well

denis_kraenert — Tue, 24 Sep 2019 01:58:43 GMT

In ACAD I can loft following 2 section easy. Revit produce different result with same function. How to get the same result in Revit. Picture: left import from ACAD, right result loft function in Revit.

Re: loft function does not work well

barthbradley — Tue, 24 Sep 2019 04:22:47 GMT

Are you in a massing environment? You might get a better result using a sweep blend in a "regular" environment.

In-Place Component Sweep Blend:

Re: loft function does not work well

loboarch — Tue, 24 Sep 2019 12:55:01 GMT

Could you give us an image of the 2 (or multiple profiles) you are using in Revit to loft the form? Or even better a file that has the form, and a copy of the profiles you are using. With that it might be easier to troubleshoot exactly what might be happening. ACAD and Revit should produce the same form using the same profiles.

Re: loft function does not work well

denis_kraenert — Mon, 30 Sep 2019 02:51:21 GMT

I solved the issue by using 2 halfes. Then blend function works fine.

Re: loft function does not work well

loboarch — Mon, 30 Sep 2019 12:21:49 GMT

Glad you resolved it. Thanks for the image illustrating.