Electrical Legend Components (Switches & Receptacles) Do Not Print Properly

aganem5DK9J — Wed, 25 Sep 2019 15:39:59 GMT

Hello,

Some of my custom electrical legend components (switches & receptacles with annotation text) do not print properly with vector processing but print completely fine with raster processing. Printing in raster is not an option due to quality loss, and I spent numerous hours of trying to work around this glitch. Also, using standard Revit receptacles in not an option either, because our Revit standards must match our existing CAD standards, and we have been doing a good job so far...

The strange part is that the issue is only when printing using vector processing. Inside of Revit, everything looks perfect, and same goes for when printing using raster proccessing.

Please see attached screen shots (I tried attaching the family to this post, but this forum will not allow me...)

Any ideas? Thanks in advance.

Re: Electrical Legend Components (Switches & Receptacles) Do Not Print Prope

Anonymous — Mon, 07 Oct 2019 18:30:25 GMT

Is any one else having similar issue? I can't figure this out 😑

topic Re: Electrical Legend Components (Switches & Receptacles) Do Not Print Prope in Revit Architecture Forum

Electrical Legend Components (Switches & Receptacles) Do Not Print Properly

Re: Electrical Legend Components (Switches & Receptacles) Do Not Print Prope