topic Re: Wall mounted rail not returning in Revit Architecture Forum

Wall mounted rail not returning

leah_coley — Thu, 22 May 2025 22:02:51 GMT

Hi there,

I am trying to draw a wall mounted handrail and it will not return to the wall. What would be the best way to fix this? Please see images below.

Re: Wall mounted rail not returning

Basam.Yousif — Thu, 22 May 2025 23:45:17 GMT

This is Autodesk content model has a few good examples you might find helpful.

Re: Wall mounted rail not returning

RDAOU — Fri, 23 May 2025 07:20:45 GMT

@leah_coley

Technically it should work with the top rail unless the values of the fillet radius, the clearances, the diameter of the profile with the length of the extension or some other parameter are not matching for one another. Once cannot troubleshoot without you posting the stair/rail for checking. Copy/Paste it to/from clipborad in a blank file and post it

If you cannot upload the file and cannot get the top rail to work, Try using Handrail 1 without the Top Rail see if the extenssion/wall return for that works

Re: Wall mounted rail not returning

kadmonkee — Fri, 23 May 2025 14:26:22 GMT

have you tried edit sketch and add the return?