topic Re: STAIRS PROBLEM in Revit Architecture Forum

STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 16:21:45 GMT

hello,

I am trying to create single step, but it is showing like in img below, it is extending beyond the tread,
I tried to change the connection method, the presentation is not correct

Re: STAIRS PROBLEM

martijn_pater — Thu, 02 Jan 2020 16:34:23 GMT

Not sure I've ever drawn a single step stairs:) I'm thinking maybe I wouldn't use stairs functionality for that actually, and just model it... edit: scratched last remark, using straight cut should work...

Re: STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 16:35:47 GMT

it is not just about modeling it, I'm using stair tool so when having a section through it, the details shall be correctly represented

Re: STAIRS PROBLEM

barthbradley — Thu, 02 Jan 2020 19:18:52 GMT

Are you trying to do it with or without a notch? Without notch should be rectangular.

...Ah, I see what you're talking about. That's the Tread NOSING.

Re: STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 19:18:33 GMT

my problem is that the step is extending inside of the wall like in attached images

Re: STAIRS PROBLEM

barthbradley — Thu, 02 Jan 2020 19:22:29 GMT

Do you also have a riser?

Re: STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 19:25:53 GMT

I need only 1 riser but my problem is with the part marked in the red circle

Re: STAIRS PROBLEM

barthbradley — Thu, 02 Jan 2020 19:29:22 GMT

That doesn't make any sense me. Almost looks like the stair is at an angle to the view. Post the file.

Re: STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 19:35:10 GMT

I clouded the part i'm talking abt

Re: STAIRS PROBLEM

barthbradley — Thu, 02 Jan 2020 19:37:45 GMT

This is what I'm seeing in Section. What's not right about it?

This one? Just move the stair forward.

Re: STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 19:36:18 GMT

the treads width is not the same, one is 300 and the other is 350

Re: STAIRS PROBLEM

barthbradley — Thu, 02 Jan 2020 19:58:05 GMT

...

Re: STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 19:48:59 GMT

this is not the issue, they are 2 different sizes 😓

Re: STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 19:53:59 GMT

the width of the tread should be 300, anyways, thanks a lot

Re: STAIRS PROBLEM

barthbradley — Thu, 02 Jan 2020 20:26:38 GMT

like this?

Re: STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 20:35:11 GMT

for the 2 steps yes I want it like that, but for the single step why is it extending to the inside of wall?

Re: STAIRS PROBLEM

barthbradley — Thu, 02 Jan 2020 20:49:02 GMT

I must have sneezed.

Re: STAIRS PROBLEM

ToanDN — Thu, 02 Jan 2020 20:52:30 GMT

Like this?

Re: STAIRS PROBLEM

basma_salman — Thu, 02 Jan 2020 20:59:06 GMT

yes exactly, did use cut profile tool or u actually worked with the stairs settings?

Re: STAIRS PROBLEM

ToanDN — Thu, 02 Jan 2020 21:00:36 GMT

The file is there for you to look at.