topic Re: GABLE ROOF PLACEMENT in Revit Architecture Forum

GABLE ROOF PLACEMENT

Mohamed_Arshad — Mon, 02 Mar 2020 12:53:59 GMT

Hii Genius,

I have a Autocad file i need to make model according to that drawing walls and floor are created easily, But gamble rook and roof shed is in issue.

i attached the file please make an solution as soon as possible.

it that drawing please ensure at which level i need to draw gable roof to match drawing.

how to make shed like drawing which is attached to the gable roof.

Re: GABLE ROOF PLACEMENT

Anonymous — Mon, 02 Mar 2020 13:13:39 GMT

Cut a hole in the main roof and draw a second roof with the walls separately. At what level should this be placed? Roof level is a good one, although you can draw it on any level.

Re: GABLE ROOF PLACEMENT

barthbradley — Mon, 02 Mar 2020 23:28:27 GMT

2 Roofs. Gable sketch shown below, and Shed could be done with a single sketch line using Roof by Extrusion.

Re: GABLE ROOF PLACEMENT

Mohamed_Arshad — Tue, 03 Mar 2020 09:48:31 GMT

ya that's ok at any level we can draw roof, But i need to match the drawing so i'm asking at which dimension level is better to march roof like drawing shown .

Re: GABLE ROOF PLACEMENT

Anonymous — Tue, 03 Mar 2020 10:17:46 GMT

Any level. I would create levels for Ground (0.00), First(2.75) and Attic (5.46). The logical place to draw the roof is on the top level.

Re: GABLE ROOF PLACEMENT

constantin.stroescu — Tue, 03 Mar 2020 10:43:27 GMT

something close to what TimELZ49 suggests...

https://knowledge.autodesk.com/community/screencast/73dda05c-6c82-4567-a259-cd06b211b8ec

Re: GABLE ROOF PLACEMENT

Mohamed_Arshad — Tue, 03 Mar 2020 13:26:58 GMT

THANK YOU VERY MUCH SIR!!!

THAT'S WORKS