topic Spot elevation and Roof Problem in Revit Architecture Forum

Spot elevation and Roof Problem

mcankusmez — Thu, 07 May 2020 14:20:46 GMT

Hi.Firstly, ı cannot add my elevation head How can ı add and seen my spot elevation head ? .Secondly, I did a roof but when ı look roof on roof plan,it looks like the picture is it true ?

Re: Spot elevation and Roof Problem

Anonymous — Thu, 07 May 2020 14:24:44 GMT

Just place new Spot elevations for the new floors.

You don't actually say what the problem with your roof is. We don't know what its supposed to look like. Perhaps the view is set to Wireframe, if that is what you are referring to.

Re: Spot elevation and Roof Problem

barthbradley — Thu, 07 May 2020 14:27:12 GMT

Re: Spot elevation and Roof Problem

mcankusmez — Thu, 07 May 2020 14:29:51 GMT

my roof lookslike picture with 3d

Re: Spot elevation and Roof Problem

mcankusmez — Thu, 07 May 2020 14:40:15 GMT

ı cannot see your solution

Re: Spot elevation and Roof Problem

Anonymous — Thu, 07 May 2020 14:49:18 GMT

It looks as if your view range isn't high enough to see the plan. Set it to be higher.

Re: Spot elevation and Roof Problem

mcankusmez — Thu, 07 May 2020 15:00:06 GMT

How can ı do it.Shall you do it and record video for me when ı upload my project ?

Re: Spot elevation and Roof Problem

barthbradley — Thu, 07 May 2020 15:20:17 GMT

@mcankusmez wrote:
How can ı add and seen my spot elevation head ?

Do you understand that Annotations (e.g. Spot Elevations, Tags, Text) are VIEW-SPECIFIC ELEMENTS?

View-specific elements display only in the views in which they are placed.

@mcankusmez wrote:

Secondly, I did a roof but when ı look roof on roof plan,it looks like the picture is it true ?

Re: Spot elevation and Roof Problem

mcankusmez — Thu, 07 May 2020 15:11:53 GMT

I didnt understand just when ı upload my elevation head ı want to see with edit type like the picture.You can see my evelation (Turkish evelation head) is not seen this panel

Re: Spot elevation and Roof Problem

mcankusmez — Thu, 07 May 2020 15:43:10 GMT

Do I need to upgrade the value in the view range ? If your answer is yes.How can ı change ?

Re: Spot elevation and Roof Problem

Anonymous — Fri, 08 May 2020 08:37:18 GMT

It's not clear what you're asking. Your roof doesn't display properly because the view range is not high enough to see the whole roof. Barthbradley shows in his post how to adjust the View range so that you can see the whole roof. Look for View Range in the View properties.

Are you asking about copying your spot elevations - as mentioned, these are view specific. Create new ones to show on different elements.

Or are you asking about the Spot Elevation head? If so what are you asking? Note that the Elevation Head has nothing to do with the View Range.

Re: Spot elevation and Roof Problem

ennujozlagam — Fri, 08 May 2020 09:11:36 GMT

you wrote:

Do I need to upgrade the value in the view range ? If your answer is yes.How can ı change ?

please see screencast. thanks

https://autode.sk/2Wg5LOt

Re: Spot elevation and Roof Problem

mcankusmez — Fri, 08 May 2020 16:46:20 GMT

thank you thank you so much. I solved the problem with the issues but ı have a question how can ı draw flue or flues gap ?

Re: Spot elevation and Roof Problem

ennujozlagam — Mon, 11 May 2020 01:14:15 GMT

you can try to use model in-place extrusion or sweep. thanks