topic Re: How to export to 3D in solid dwg, according to the adjusted layer? in Revit Architecture Forum

How to export to 3D in solid dwg, according to the adjusted layer?

CucuSetiawan — Tue, 30 Jun 2020 12:49:47 GMT

How to export to 3D in solid dwg, according to the adjusted layer?

I've tried it for 2D layers can be adjusted. but export to the 3D layer view cannot export

The picture below I've done the layer for rebar.

I've done the layer for rebar.

Under this export result, the layer in AutoCad does not exist.

I hope to get a solution

Thank you

Re: How to export to 3D in solid dwg, according to the adjusted layer?

barthbradley — Tue, 30 Jun 2020 19:47:52 GMT

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2019/ENU/Revit-DocumentPresent/files/GUID-CE5C1481-40BE-4503-A55C-25B0BC0F817B-htm.html

Re: How to export to 3D in solid dwg, according to the adjusted layer?

CucuSetiawan — Wed, 01 Jul 2020 01:24:55 GMT

Mr @barthbradley

I'd like a layer arrangement. when the export layer is set.

The link provided is for export to Solid only.

Re: How to export to 3D in solid dwg, according to the adjusted layer?

barthbradley — Wed, 01 Jul 2020 02:02:47 GMT

Oops. My bad. I misunderstood. As far I know, that's all hard-coded.

Re: How to export to 3D in solid dwg, according to the adjusted layer?

CucuSetiawan — Wed, 01 Jul 2020 06:03:52 GMT

Dear @barthbradley

Thank you
I think setting this layer, it will also export to 3D solid.

Re: How to export to 3D in solid dwg, according to the adjusted layer?

barthbradley — Wed, 01 Jul 2020 06:50:42 GMT

@CucuSetiawan wrote:
Dear @barthbradley

Thank you
I think setting this layer, it will also export to 3D solid.

What Layer setting are you talking about? The 3D solid geometry is mapped automatically to predesignated in-built Categories and Subcategories. However, 2D Projection and Cut Lines Representations can be mapped to custom Subcategories which will translate to DWG Layers upon Export . I assume that is what all those subcategories under Rebar are for. Am I right?

Re: How to export to 3D in solid dwg, according to the adjusted layer?

Anonymous — Wed, 01 Jul 2020 07:13:43 GMT

That's right, regarding sub catergory rebar

I have arranged it in this section

If I export 2D sub category, there is. but for 3D solid nothing.
Sorry, my English is bad

Re: How to export to 3D in solid dwg, according to the adjusted layer?

barthbradley — Wed, 01 Jul 2020 07:35:33 GMT

That's exactly how it works. You might want to head on over the API forum and ask those guys if something can be done through the API. If you find out something interesting, would you be so kind as to post me back. Thanks.

Re: How to export to 3D in solid dwg, according to the adjusted layer?

CucuSetiawan — Thu, 02 Jul 2020 01:40:39 GMT

Looks like I went to the API Forum, well I'll try to find answers there, and I'll share the results with you.
Thank you for chatting with you