topic Re: Railing material hatch in section not shown in Revit Architecture Forum

Railing material hatch in section not shown

Anonymous — Wed, 16 Sep 2020 09:36:26 GMT

Hello guys,

I created a railing component and assigned a material to some part of it. In Family looks everything fine but when I load it to the model, I can't see the hatch patterns in section view. In 3D I can see material but patterns are not shown.

Thanks for help

Re: Railing material hatch in section not shown

syman2000 — Wed, 16 Sep 2020 15:08:41 GMT

I run into the same issue. To overcome this, I usually place the surface patter to be the same as cut.

As a result, you will see the pattern to show up

Re: Railing material hatch in section not shown

barthbradley — Wed, 16 Sep 2020 23:10:59 GMT

Likely the Family Material is named the same as a Project Material and the Project Material does not have Cut Pattern assigned to it. In that case, the Project Material always rules. Families use the Project's Materials. Best way to deal with this is to name the Family Material something else -- a name not used by a Project Material.

Re: Railing material hatch in section not shown

ToanDN — Thu, 17 Sep 2020 01:09:08 GMT

Railings is a non-cutable category so you will not see the material cut pattern. Either fake it with the surface pattern as suggested, or use a curtain wall instead of a railing.

Re: Railing material hatch in section not shown

barthbradley — Thu, 17 Sep 2020 02:03:14 GMT

@ToanDN wrote:
Railings is a non-cutable category so you will not see the material cut pattern. Either fake it with the surface pattern as suggested, or use a curtain wall instead of a railing.

Huh? Maybe my Revit didn't get the memo, because it is cutting and showing cut pattern of railing components.

Re: Railing material hatch in section not shown

lim.wendy — Thu, 17 Sep 2020 06:11:56 GMT

Hi @Anonymous,

Welcome to the forum and thanks for posting. Looks like the community has provided some suggestions. If the suggestions helped you, please hit the "Accept Solution" button, as it helps makes the solution easier to find for others who might have the same issue. Knowing which topics are solved or not can also help our many users find the questions that still need to be answered. It’s also a great way to say thank you and give recognition to whoever helped you. 🙂

Re: Railing material hatch in section not shown

Anonymous — Thu, 17 Sep 2020 07:35:52 GMT

Hello,

thanks for help 🙂 You are using an old Version Revit, which has only one Option for Patterns. In Revit 2020 they made it as foreground and Background. There is a definitely a bug there.. If I Change pattern of foreground like you did, I see in section but actually it has to be shown what we assign in section pattern.

Re: Railing material hatch in section not shown

Anonymous — Thu, 17 Sep 2020 07:38:16 GMT

Hi,

they are same. When I assign a pattern to foreground it applies but that is false.. I would like to see the pattern only in section view.

Re: Railing material hatch in section not shown

barthbradley — Thu, 17 Sep 2020 17:00:02 GMT

I see no BUG! in your latest screenshot. In fact, it looks like Revit is working perfectly.

The below screenshots show that the Family's "Rail Material" Cut Pattern is shown differently in the Project for the reason I explained previously. Project Materials Always Rule. These screenshots also clearly show that the Material's Cut Pattern is displayed for Railing Component in Section Views - 2D and 3D.

IN FAMILY ENVIRIOMENT:

IN PROJECT ENVIRONMENT:

Re: Railing material hatch in section not shown

Anonymous — Fri, 18 Sep 2020 07:40:08 GMT

Hello,

thanks for screenshots. In yourside it works but I tell you what I have done.

I edited the family document which has category "vertikale Holme" and then I created an extrusion as Fundament. I created a new parameter called "Material Fundament" I assigned the material to extrusion and load it to project. Without Foreground pattern it did not work in Family document. If I change the foreground material like in cut pattern it works, however only cut pattern does not work.

Re: Railing material hatch in section not shown

barthbradley — Fri, 18 Sep 2020 16:39:32 GMT

Let's have a look at it. Post the family here.

Re: Railing material hatch in section not shown

Anonymous — Mon, 21 Sep 2020 07:11:24 GMT

Here it is 🙂

Re: Railing material hatch in section not shown

barthbradley — Mon, 21 Sep 2020 07:34:51 GMT

Cuts fine here:

Re: Railing material hatch in section not shown

Anonymous — Mon, 21 Sep 2020 07:37:14 GMT

Without foreground pattern too? I see that you selected sand as foreground pattern.

Re: Railing material hatch in section not shown

barthbradley — Mon, 21 Sep 2020 07:42:28 GMT

This?

Re: Railing material hatch in section not shown

Anonymous — Mon, 21 Sep 2020 07:53:11 GMT

Sorry for missunderstanding. I wanted to mean surface foreground. I assigned only cut pattern not surface. When I assign a surface foreground pattern it works, as I wrote before. The problem is when I assign only cut pattern.

I changed my strategy and I created a profile for railing with same material. It works.

Re: Railing material hatch in section not shown

martijn_pater — Mon, 21 Sep 2020 11:00:50 GMT

Did you check your visibility graphics and object style (/material) overrides for the section? edit: never mind I think.

Re: Railing material hatch in section not shown

Anonymous — Mon, 21 Sep 2020 11:24:33 GMT

Yes, I did. Even if I override it with a pattern, it does not apply.

Re: Railing material hatch in section not shown

Anonymous — Mon, 21 Sep 2020 11:34:59 GMT

Thank you very much guys! It seems to be a bug and the solution is how @syman2000 decribed. Without surface pattern it does not work.

Re: Railing material hatch in section not shown

barthbradley — Mon, 21 Sep 2020 15:13:50 GMT

@Anonymous wrote:
Thank you very much guys! It seems to be a bug and the solution is how @syman2000 decribed. Without surface pattern it does not work.

There is no fricking BUG! here, and I've posted numerous screenshots to prove it. Here's another one:

Maybe your BUG! is a loose nut behind the keyboard?