topic Re: Reporting Shared parameters in Revit Architecture Forum

Reporting Shared parameters

Anonymous — Wed, 07 Oct 2020 11:18:22 GMT

How to make a shared parameter that will automatically report the room length and width as shown in the picture.

Re: Reporting Shared parameters

martijn_pater — Wed, 07 Oct 2020 11:52:27 GMT

This is what.. a deculple post? Start another topic, why don't you...

If the previous didn't answer it. Perhaps you're looking to create a room tag with a label... (create new family --> generic family tag --> switch to room tag category --> add a label --> new, find your shared parameters and add those to the label --> save --> load into project --> tag room with the tag you created... done)

Ofcourse you could just use the one that's in the topic I sent you before in the double or triple post you started before this one...

Re: Reporting Shared parameters

Anonymous — Wed, 07 Oct 2020 13:41:44 GMT

Stop replying if you are not understanding what I want to ask . And I know how to make a room tag and customize the label .

Re: Reporting Shared parameters

Anonymous — Wed, 07 Oct 2020 13:51:06 GMT

Read the first step it's completely different than what are to saying me .. you are simply referring to make a shared parameter but I want to know how can a report length to the shared parameter that I created . Read the step 1 in this picture

Re: Reporting Shared parameters

martijn_pater — Wed, 07 Oct 2020 13:59:03 GMT

Perhaps be more clear in your questioning then, and elaborate on that if you're not getting the answer you're looking for in the same topic for others to respond to if not me.

Here are the links again I edited in my previous reply, can't remember which topic anymore though by now:
https://forums.autodesk.com/t5/revit-architecture-forum/how-to-add-length-and-width-of-a-room-as-parameters-in-schedule/m-p/9357924#M274575

https://forums.autodesk.com/t5/revit-architecture-forum/room-dimensions/m-p/9207652

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/simplecontent/content/use-dynamo-to-report-room-width-and-length-revit-room-tag.html

Good luck.

Re: Reporting Shared parameters

martijn_pater — Wed, 07 Oct 2020 14:09:01 GMT

@Anonymous wrote:
Read the first step it's completely different than what are to saying me .. you are simply referring to make a shared parameter but I want to know how can a report length to the shared parameter that I created . Read the step 1 in this picture.

The values are written to these parameters by the Dynamo graph as shown in the video in the last link, the parameters first need to be there to write to however.

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/screencast/Main/Details/42c517a2-08f4-487f-b637-39274f54e8de.html

Re: Reporting Shared parameters

martijn_pater — Wed, 07 Oct 2020 14:09:48 GMT

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/screencast/Main/Details/42c517a2-08f4-487f-b637-39274f54e8de.html