topic Re: Just installed 2021 - Plywood texture not aligning in Revit Architecture Forum

Just installed 2021 - Plywood texture not aligning

greghHW3PE — Thu, 06 May 2021 14:45:28 GMT

I have the align option set. nothing

I even created another plywood texture. nothing

Is this a bug?

I installed the latest fix from a few days ago.

I am on Windows 7 still. I hope that wouldn't make a difference.

Re: Just installed 2021 - Plywood texture not aligning

barthbradley — Thu, 06 May 2021 14:55:30 GMT

How do you mean? Do you mean Aligning the Graphic Model Surface Pattern and the Appearance Asset Texture?

Re: Just installed 2021 - Plywood texture not aligning

greghHW3PE — Thu, 06 May 2021 15:03:16 GMT

Sorry I wasn't too clear. I meant the fill pattern is not aligning with a line based detail item. I have the pattern set to align but it doesn't work.

Re: Just installed 2021 - Plywood texture not aligning

barthbradley — Thu, 06 May 2021 15:05:13 GMT

Sorry. Don't understand. Post an illustration.

Re: Just installed 2021 - Plywood texture not aligning

greghHW3PE — Thu, 06 May 2021 15:10:43 GMT

Re: Just installed 2021 - Plywood texture not aligning

barthbradley — Thu, 06 May 2021 15:22:28 GMT

There's nothing you can do about that. You need to create different hatches for different angles.

Re: Just installed 2021 - Plywood texture not aligning

ToanDN — Thu, 06 May 2021 16:31:17 GMT

Draw a line in the line bases family and use array to stretch it alonh the length.

Re: Just installed 2021 - Plywood texture not aligning

cbcarch — Fri, 07 May 2021 13:41:26 GMT

If you are meaning a Drafting Fill Pattern, under Orientation in Host Layers, you have (3) choices:

Align with Element
Keep Readable
Orient to View

In your case I think you would want Align with Element.

Re: Just installed 2021 - Plywood texture not aligning

ToanDN — Fri, 07 May 2021 21:02:41 GMT

@cbcarch wrote:

If you are meaning a Drafting Fill Pattern, under Orientation in Host Layers, you have (3) choices:

Align with Element

Keep Readable

Orient to View

In your case I think you would want Align with Element.

That doesn't work for external families, only system components such as walls.

Re: Just installed 2021 - Plywood texture not aligning

lucdoucet_msdl — Sat, 08 May 2021 01:57:49 GMT

@greghHW3PE

When using Revit Fill Regions in a detail family, be it linear or not, you can assign either model or drafting patterns.

Model patterns will align with the rotation of the element but scale up and down according to the scale factor of the view.
Drafting patterns will conserve the pattern spacing according to the view scale and, except for detail components and filled regions, allow three options for alignment.

So, in the case of a linear detail plywood element family, you would need to define a model pattern.

Considering the various scales at which your detail elements needs to be readable and how to ensure a proper reading at each, a possible workflow would be to define 3 groups of scales (<1:2, 1:5, and >1:5) and assign model patterns for each of the three view detail levels (fine, medium, low).

Your linear detail family would then have the filled region duplicated three times, assigned visibility to the view detail level and corresponding model pattern. When the detail level is changed in the view, the corresponding scaled model pattern will be displayed.

An added bonus would be to also adjust the line work for the three detail levels so the fine detail views will have a correspondingly bolder line than a low detail level view where the linework can become muddied by the close proximity of two sides of the plywood panel.

Additionally, when the fill pattern becomes to dense, revit will substitute a blank masking region, which is logical in that a 19mm thick plywood panel at scales of 1:20 and higher rarely benefit from a fill pattern.

Hope this helps,

-luc

Re: Just installed 2021 - Plywood texture not aligning

cbcarch — Mon, 10 May 2021 13:26:13 GMT

Then why use a Detail Component?

Just use the Host Wall or Roof to show the Drafting fill pattern aligned correctly.