topic Re: Help to create Hatch Pattern (Pat File) in Revit Architecture Forum

Help to create Hatch Pattern (Pat File)

Anonymous — Fri, 28 May 2021 03:09:54 GMT

Dear all, I tried so many times for that hatch pattern but still not yet correct. Pls help to create hatch pattern below image

Re: Help to create Hatch Pattern (Pat File)

ennujozlagam — Fri, 28 May 2021 03:26:22 GMT

you can refer to this LINK and see if helps. thanks

Re: Help to create Hatch Pattern (Pat File)

barthbradley — Fri, 28 May 2021 05:11:50 GMT

Let's check out your txt file. Post it.

Re: Help to create Hatch Pattern (Pat File)

Pattycake_Kyle — Fri, 28 May 2021 05:33:59 GMT

Hey @Anonymous

Here ya go: https://pattycake.io/pat/YlRY9e4wveQ

This one was written by hand, you can learn more how to do that through this tutorial we put together.

However, you can also use this one: https://pattycake.io/pat/Yll1WNdrWGG

This was made (much) easier by just drawing it in our draw in web - you don't need to 'understand' the PAT syntax at all.

Both will function the exact same in revit. We've tested this thoroughly --- there is no performance difference/degradation in PAT files of this size (generally you are safe up into hundreds of lines before any issue shows up - and it has more to do with density of the PAT and tolerance/precision than # of lines).

🎂Cheers!

Night mode is dope mode

Draw in Web rocks our socks

Re: Help to create Hatch Pattern (Pat File)

hugha — Fri, 28 May 2021 10:32:54 GMT

The equivalent and equally efficient pattern is directly available on filling in block size and offset as shown in the attachment:

;--------------------------------------------------------------------
; Written by HatchKit 4 Standard Edition
; HatchKit 4 Standard Edition (c)1990-2021 Cadro Pty Ltd
; www.hatchkit.com.au/
;--------------------------------------------------------------------
;-Date : 2021/05/28
;-Time : 18:13:53
;-HatchKit 4 Version : 4.1.4.3038
;-HatchKit 4 Output Filetype : Revit with HatchKit Add-In
;--------------------------------------------------------------------
;%VERSION=3.0
;%UNITS=INCH
*Phyoei,
;%TYPE=MODEL
0,0,0,0,300
90,0,0,-2100,50,300,-3300

hth,

Hugh Adamson

www.hatchkit.com.au

Re: Help to create Hatch Pattern (Pat File)

marlette — Thu, 18 May 2023 12:26:58 GMT

I am trying to create a custom hatch for a staggered, woodplank, random looking hatch.

I need it in 1220 x 230mm.

I tried to adjust this 100 x 800 pattern. But just don't get it to work. I even asked chatgpt, but it couldn't figure it out either. Can someone please assist?

;%UNITS=MM
*100 x 800mm Wood Board, Wood: Wide boards
;%TYPE=MODEL
0, 0, 20, 0, 100
90, 0, 20, 200, 200, 100, -700
90, 400, 120, 200, 200, 100, -700

How can I get this wood board look in 1220 x 230mm?

Re: Help to create Hatch Pattern (Pat File)

hugha — Fri, 19 May 2023 04:49:58 GMT

try:

;-------------------------------------------------------------------------------
; Written by HatchKit 4 Standard Edition
; HatchKit 4 Standard Edition (c)1990-2023 Cadro Pty Ltd
; www.hatchkit.com.au/
;-------------------------------------------------------------------------------
;-Date : 2023/05/19
;-Time : 14:45:39
;-HatchKit 4 Version : 4.3.1.3212
;-HatchKit 4 Output Filetype : Revit® with HatchKit Fill Manager
;-------------------------------------------------------------------------------
;%VERSION=3.0
;%UNITS=MM
*230x1220mm Wood Board,Wood: Wide boards
;%TYPE=MODEL
0,0,0,0,230
90,610,230,-1380,305,230,-1610
90,0,0,-1380,305,230,-1610

hth,

Hugh Adamson

www.hatchkit.com.au

Re: Help to create Hatch Pattern (Pat File)

marlette — Fri, 19 May 2023 06:29:46 GMT

it works! thank you!