topic Re: Sweep using profile family in Revit API Forum

Sweep using profile family

grahamcook — Thu, 25 Feb 2016 21:27:05 GMT

I would like to create a sweep using the NewSweep method. One of the expected parameters is Profile. Reading the documentation this could be a profile family. I can get my profile family like this:

FamilySymbol newFSP = (from elem in new FilteredElementCollector(doc)
                                        .OfClass(typeof(FamilySymbol))
                                       let type = elem as FamilySymbol
                                       where type.FamilyName == "Profile_HalfRound"
                                       select type).FirstOrDefault();

But i need a FamilySymbolProfile type (which inherits from SweepProfile). How do i get a FamilySymbolProfile type reference from my profile family?

I have tried modifying the linq above (changing typeof etc) but without success.

Re: Sweep using profile family

Revitalizer — Fri, 26 Feb 2016 09:18:32 GMT

Hi Graham,

next step is to call this method:

FamilySymbolProfile Application.NewFamilySymbolProfile(FamilySymbol familySymbol)

Revitalizer

Re: Sweep using profile family

jeremytammik — Fri, 26 Feb 2016 09:20:31 GMT

Dear Graham,

Have you looked at these old samples on The Building Coder?

New Sweep and References -- http://thebuildingcoder.typepad.com/blog/2009/08/new-sweep-and-references.html

Sweep PickPath Tolerance Criteria -- http://thebuildingcoder.typepad.com/blog/2012/10/sweep-pickpath-tolerance-criteria.html

Or are they too old to help?

Cheers,

Jeremy

Re: Sweep using profile family

grahamcook — Fri, 26 Feb 2016 14:36:56 GMT

Thank you Revitalizer.

doc.Application.Create.NewFamilySymbolProfile(newFS) done the trick.

Ideally though i would like to just modify the profile on an existing sweep like in the code below. Although the code runs through with no errors it makes no changes to the sweep. The profile property of ProfileSymbol does appear to be read / write but probably only in the context of NEW ProfileSymbols on NEW sweeps, not existing ones. But now i know how to get a NewFamilySymbolProfile reference i can re-create the sweep (albiet having to re-creating the path contraints which is painful )

// get the first sweep
Sweep sweep = (from elem in new FilteredElementCollector(doc)
                           .OfClass(typeof(Sweep))
                           let type = elem as Sweep
                           select type).FirstOrDefault();

// Get the new profile
FamilySymbol newFS = (from elem in new FilteredElementCollector(doc)
                                        .OfClass(typeof(FamilySymbol))
                                          let type = elem as FamilySymbol
                                          where type.Name == "Profile_HalfRound"
                                          select type).FirstOrDefault();


// set the new profile (but has no effect)
sweep.ProfileSymbol.Profile = newFS;

Re: Sweep using profile family

grahamcook — Fri, 26 Feb 2016 14:41:37 GMT

Thank you Jeremy. I would say your articles are never never too old! But in this case Revitaliser gave me the answer i was after.

Re: Sweep using profile family

Anonymous — Mon, 17 Oct 2016 03:24:30 GMT

Although it takes no effect to directly set the FamilySymbolProfile.Profile property, you can try to get a parameter of BuiltinParameter.PROFILE_FAM_TYPE from the sweep element and set the id of the new familysymbol to this parameter. Wish this can help you

Re: Sweep using profile family

dirk.neethling — Wed, 08 Mar 2017 11:47:20 GMT

Hallo Jeremy,

where can I find a complete sweep example?

I need to draw a rubber seal in a groove. It's fairly straight-forward in terms of geometry, but I'm struggling to get going.

Regards, Dirk

Re: Sweep using profile family

jeremytammik — Wed, 08 Mar 2017 15:11:20 GMT

Dear Dirk,

Have you checked the Revit SDK samples?

Look at

SDK/Samples/FamilyCreation/GenericModelCreation/CS/Command.cs

Otherwise, I can only repeat the pointers I already provided above:

New Sweep and References -- http://thebuildingcoder.typepad.com/blog/2009/08/new-sweep-and-references.html
Sweep PickPath Tolerance Criteria -- http://thebuildingcoder.typepad.com/blog/2012/10/sweep-pickpath-tolerance-criteria.html
Sweep Family Performance Enhancement -- http://thebuildingcoder.typepad.com/blog/2013/03/sweep-family-performance-enhancement.html

Cheers,

Jeremy

Re: Sweep using profile family

dirk.neethling — Thu, 09 Mar 2017 12:59:11 GMT

Hello Jeremy,

I checked out your samples, the thing is I want to draw directly in the document, and not via a Family. So it seems that the utilities under

GeometryCreationUtilities would be useful. I am struggling along to get to a point where I can extrude a profile along an Arc. So I am working through your samples, in the hope of eventually stringing things together.

I am using this simple example, taken from your blog:

http://thebuildingcoder.typepad.com/blog/2015/07/intersect-solid-filter-avf-and-directshape-for-debugging.html

/// <summary>
/// Create and return a cube of
/// side length d at the origin.
/// </summary>
static Solid CreateCube( double d )
{
return CreateRectangularPrism(
XYZ.Zero, d, d, d );
}

When I run CreateCube(2) or similar, nothing appears in the 3D view?

What am I doing wrong?

Regards, Dirk Neethling

Re: Sweep using profile family

grahamcook — Thu, 09 Mar 2017 20:49:01 GMT

Dirk

The example you are following will only create the solid in memory, and NOT in the Revit document. You can only use this solid for intersection analysis, Boolean operations, etc. See http://thebuildingcoder.typepad.com/blog/2012/09/sphere-creation-for-avf-and-filtering.html

Also, here is a link to creating solids, sweeps, extrusions in a FAMILY. http://bim-g.blogspot.co.uk/2012/07/analyzing-sdk-samples_132.html#!/2012/07/analyzing-sdk-samples_132.html

Unless the API now allows the creation of In-Place families, you may not be able to automate the sweep as you want. I've googled it but can only find an old post from Jeremy from 2010 stating that in-place families are not supported, I cannot find anything more recent to the contrary - hope I'm wrong though

Regards

Graham Cook

Re: Sweep using profile family

dirk.neethling — Fri, 10 Mar 2017 12:10:29 GMT

Hello Graham,

Revitalizer helped me solve the problem.

The solid object in memory can be inserted into the project like so:

solid = GeometryCreationUtilities.CreateExtrusionGeometry(loops, v, v.GetLength());

categoryId = new ElementId(BuiltInCategory.OST_GenericModel);

ds = DirectShape.CreateElement(doc, categoryId, Guid.NewGuid().ToString(), Guid.NewGuid().ToString());

solids = new List<GeometryObject>() { solid };

ds.SetShape(solids);

ds.Name = "ExtrusionTest4";

Using Families in this case would be too much trouble.

Regards, Dirk

Re: Sweep using profile family

grahamcook — Fri, 10 Mar 2017 12:29:09 GMT

Hi Dirk.

Thanks for sharing. That's good to know!

Graham

Re: Sweep using profile family

jeremytammik — Sat, 10 Feb 2018 15:19:15 GMT

I created a complete minimal sample add-in generating a FamilySymbolProfile from scratch to answer this subsequent related question:

https://forums.autodesk.com/t5/revit-api-forum/sweep-profile-from-family/m-p/7758601

Here is the direct link to the GitHub repository:

https://github.com/jeremytammik/NewFamilySymbolProfile

Cheers,

Jeremy

Re: Sweep using profile family

jeremytammik — Sun, 11 Feb 2018 15:51:46 GMT

I published and documented a complete NewFamilySymbolProfile sample add-in to demonstrate the steps:

http://thebuildingcoder.typepad.com/blog/2018/02/newfamilysymbolprofile-sample-add-in.html

https://github.com/jeremytammik/NewFamilySymbolProfile

Enjoy!

Cheers,

Jeremy