topic wall join showing wrong in elevation in Revit API Forum

wall join showing wrong in elevation

Anonymous — Tue, 11 Dec 2018 08:26:39 GMT

I have three walls joining in one corner. I have joined the two main walls and the third one I've cut with a void for the corner to look correct in plan views. For some reason this third wall joining the corner shows a white gap in elevation even though the third wall is joined to the corner without any gap. I've zoomed to the corner as close as you can and there´s not even a 0,1 mm gap in between the two. Why is this happening and how can i fix this so that the elevation look correct?

Re: wall join showing wrong in elevation

jeremytammik — Tue, 11 Dec 2018 10:02:37 GMT

Please note that this discussion forum is dedicated to programming Revit using the Revit API.

Therefore, you cannot expect an answer to a question such as yours relating to installation, product usage or end user support issues here.

You should try one of the non-API Revit product support discussion forums instead for that:

https://forums.autodesk.com/t5/revit-api-forum/this-forum-is-for-revit-api-programming-questions-not-for/td-p/5607765

The people there are much better equipped to answer your question than us programming nerds.

I hope this clarifies.

Thank you for your cooperation and understanding.

Best regards,

Jeremy

Re: wall join showing wrong in elevation

Anonymous — Tue, 11 Dec 2018 10:15:13 GMT

Posting this on API forum was a mishap, sorry!