topic Re: NewFamilyInstance doubling the offset from level? in Revit API Forum

NewFamilyInstance doubling the offset from level?

PerryLackowski — Thu, 07 Apr 2022 14:11:39 GMT

I'm trying to place an instance of a concrete equipment pad family at the same location as my equipment, then raise the equipment by the height of the pad. I had success using NewFamilyInstance(XYZ, FamilySymbol, StructuralType). However, this particular overload doesn't assign my new pad to the same level as the equipment. I looked through the overloads for NewFamilyInstance and found this one: NewFamilyInstance Method (XYZ, FamilySymbol, Level, StructuralType). Unfortunately, when I insert the new pad using the location and level of the original equipment, the new pad appears to be adding the Z elevation to the level elevation, so the pad appears at double the elevation of the equipment. What am I missing?

new_pad = doc.Create.NewFamilyInstance(equipment_element.Location.Point, concrete_pad_standard, doc.GetElement(equipment_element.LevelId), StructuralType.NonStructural )

Re: NewFamilyInstance doubling the offset from level?

PerryLackowski — Thu, 07 Apr 2022 14:48:30 GMT

While I still think the NewFamilyInstance command is bugged, I found a workaround. Rather than using the location of the equipment as the XYZ argument, I first modified it so the Z component is the equipment's Elevation from Level. This effectively subtracts the Level's elevation from the Z component, since the NewFamilyInstance command is adding it back in when it sets the level.

el = equipment_element.Location.Point new_pad_location = XYZ(el.X, el.Y, equipment_element.get_Parameter(BuiltInParameter.INSTANCE_ELEVATION_PARAM).AsDouble()) new_pad = doc.Create.NewFamilyInstance(new_pad_location, concrete_pad_standard, doc.GetElement(equipment_element.LevelId), StructuralType.NonStructural )

Re: NewFamilyInstance doubling the offset from level?

PerryLackowski — Thu, 07 Apr 2022 15:58:14 GMT

Found a similar thread. Same issue, same workaround:

https://forums.autodesk.com/t5/revit-api-forum/document-create-newfamilyinstance-places-element-with-wrong-z/m-p/9601107