topic Re: RMS error Powershape in PowerShape Forum

RMS error Powershape

Anonymous — Fri, 12 Aug 2016 12:21:47 GMT

Hello,

I got a RMS error when I open Powershape 2016 since one week

Someone could help me please?

Re: RMS error Powershape

Anonymous — Sat, 13 Aug 2016 02:46:14 GMT

Hi,

It's about you license, if you paid for it, I think there are two options:

- first, if you have a network license, check your internet connection

- second, if you have a dongle (USB key), check if it is plugged in

If there is all right, you should think about the tip wrote at the end of this message.

Mateusz

Re: RMS error Powershape

ewshp — Sat, 13 Aug 2016 10:56:09 GMT

Hi,

RMS license (network license) can be a pain to debug depending on the network configuration of your company.

Reading your post, it seems it worked a week ago....did you made any modification to your computer in the mean time ? Some firewall may block request to the licence server.

Also make sure that the latest version of the RMS file containing your licence has been properly setup on the licence server as follows :

RMS License Manager Tool > Remove all features > Add Feature > From a File > <your_rms_file>

As the error code displayed refers to : No license code is available for this feature on the specified host

Hope this helps.

Sam

Re: RMS error Powershape

Yogesh.Mohite — Tue, 16 Aug 2016 12:48:40 GMT

Hi @Anonymous

Error 1005 means that the application is unable to acquire a license; this happens usually because the server is not running, or cannot be seen across the network or 'The licensing system has no licensing resources that could satisfy the request'.Please check that you have renewed license properly.

Please use below given procedure to renew license file.

Close all applications running off the back of the license server
Open the license manager tool
Delete all licenses from the server
Stop the server
Delete "lservrc" from the installation tree - e.g. Drive:\Program Files\Delcam\Flex4004\sys\exec\lservrc
Re-start the server
Install the new license onto the server.

Note: License file feature are store on "lservrc", so deleting this file will delete all your old features.

Please accept as solution if my post fully resolves your issue, or reply with additional details if the problem persists.

Thank You.

Re: RMS error Powershape

Anonymous — Thu, 18 Aug 2016 07:39:40 GMT

Hello,

Thank you for your answers,It works now.

It was a RMS License Manager Tool error. I didn't know that there were a server which manage the license and the problem come from him.

I restarted the License Server Service and that's ok now.

Thanks