topic Re: Post Processor Modification in PowerMill Forum

Post Processor Modification

newgentooling — Mon, 01 Nov 2021 09:09:19 GMT

Dear Sir,

1) We are Using Vary Toolpath in Same Tool. Initially First Toolpath Next Tool Command Generate, Further Toolpath Next Tool Command Generate But Same Tool Happen. We Need Next Tool Number.(Highlighted Red Color)

2) In a Model We Generate 3D&2D Program. First 3D programming Toolpath Used Stock XYZ Consider.

Further 2D Programming Toolpath Used 3D programming Stock XYZ Automatic Consider. In Output Nc programming

Stock in XYZ Not Required 2D Toolpath.(Highlighted Green Color)

Re: Post Processor Modification

karan30782 — Mon, 01 Nov 2021 11:06:45 GMT

could you simplifiy your question in detail .

what you want ?

and how ?

Clear your question in detail.

Thank you !

Re: Post Processor Modification

newgentooling — Mon, 01 Nov 2021 13:00:07 GMT

Dear Sir,

As For Attached Image And Video Not Required Stock In XYZ Option Of 2d Nc Program Output Only.

Re: Post Processor Modification

cam.tech — Sat, 06 Nov 2021 18:37:19 GMT

Your modification request seems to be not understandable. Kindly explain what you want to modify

Re: Post Processor Modification

newgentooling — Mon, 08 Nov 2021 07:19:16 GMT

Dear Sir,

Please Provide The Post Processer To Us newgentooling@gmail.com