https://forums.autodesk.com/t5/powermill-forum/kuka-robot-linear-track-configuration/m-p/12388463#M2864 <P>Hello,</P><P>&nbsp;</P><P>We are doing the configuration for kuka robot along with linear track for milling application</P><P>Robot - KR 120 R3900 ultra k</P><P>Linear track- KL 1500 15m</P><P>when we do milling with different position of E1 we are able to observe different depth in milling. the leveling of the track is within 1mm(+- 0.5) but the depth difference is around 2mm.</P><P>we have calibrated the linear track as mentioned in kuka manual but we are unable to update the value of it in powermill.&nbsp;</P><P>Does anyone have solution for this problem.</P><P>&nbsp;</P><P>Regards,</P><P>&nbsp;</P><P>&nbsp;</P> Mon, 20 Nov 2023 12:08:52 GMT david_workacc08 2023-11-20T12:08:52Z https://forums.autodesk.com/t5/powermill-forum/kuka-robot-linear-track-configuration/m-p/12388463#M2864 <P>Hello,</P><P>&nbsp;</P><P>We are doing the configuration for kuka robot along with linear track for milling application</P><P>Robot - KR 120 R3900 ultra k</P><P>Linear track- KL 1500 15m</P><P>when we do milling with different position of E1 we are able to observe different depth in milling. the leveling of the track is within 1mm(+- 0.5) but the depth difference is around 2mm.</P><P>we have calibrated the linear track as mentioned in kuka manual but we are unable to update the value of it in powermill.&nbsp;</P><P>Does anyone have solution for this problem.</P><P>&nbsp;</P><P>Regards,</P><P>&nbsp;</P><P>&nbsp;</P> Mon, 20 Nov 2023 12:08:52 GMT https://forums.autodesk.com/t5/powermill-forum/kuka-robot-linear-track-configuration/m-p/12388463#M2864 david_workacc08 2023-11-20T12:08:52Z