topic Re: Vortex roughing path in PowerMill Forum

Vortex roughing path

ismV3CFD — Tue, 03 Jul 2018 04:13:12 GMT

We are facing the problem on Vortex machining here I used 12.0 mm bullnose with radius of 0.8 I want to cut full depth of 21.59 mm the toolpath results shown in attached file first depth started outside area to inside its fine , after that its going to next level depth its going to ramp but I don't know why its going ramp that is also possible outside cutting .when going to ramp tool wear is more compare to side milling . kindly give me the solution for the same .

Thanks

version : -Autodesk PowerMill Ultimate 2019Version: 2019.0.3.2019022Build Date: Mon Jun 18 10:52:51 UTC 2018Status: Full Release

os -

Windows 10

Re: Vortex roughing path

emilie.a — Thu, 05 Jul 2018 17:17:45 GMT

Hi,
Could you please contact your local support team so that they open a ticket with our development team? It would help us investigate the problem.
Thanks,
Emilie

Re: Vortex roughing path

ismV3CFD — Fri, 06 Jul 2018 05:39:07 GMT

Thanks for your reply, already i have asked our local supplier their also given the same reply to us anyway kindly give the solution to us as soon as possible .

Thanks

Re: Vortex roughing path

dkakuma — Fri, 06 Jul 2018 09:19:25 GMT

Hi ,

try to split the toolpath to levels