topic Postprocesador powermill 5 axes for mach3 in PowerMill Forum

Postprocesador powermill 5 axes for mach3

Anonymous — Mon, 24 Sep 2018 19:47:31 GMT

hello good day I need a Postprocesador powermill 5 axes for mach3 I have tried to do it but for me it is very difficult and I have failed.
If any of you can help me I appreciate it very much
greetings to all
Thank you

Re: Postprocesador powermill 5 axes for mach3

thaont.cnc — Tue, 25 Sep 2018 07:37:04 GMT

You need 5 axis Table Table or Head Table?

Re: Postprocesador powermill 5 axes for mach3

Sudhira — Tue, 25 Sep 2018 07:37:15 GMT

@Anonymous wrote:
hello good day I need a Postprocesador powermill 5 axes for mach3 I have tried to do it but for me it is very difficult and I have failed.
If any of you can help me I appreciate it very much
greetings to all
Thank you

Hi @Anonymous,

As your concern regarding post-processor, it's a task of our dedicated post-processor team. I would like to suggest you contact your reseller or account manager (whomever sold you PowerMill) to seek assistance in modifying this post. Otherwise, you can generate a case to help you in this matter by following the mentioned link. These are the solution for your query and get the right solution in right time.

Create & Submit a Case

Re: Postprocesador powermill 5 axes for mach3

powercam.ir — Fri, 28 Sep 2018 16:34:49 GMT

Send me the full specifications of the machine to give you the appropriate post processor

Re: Postprocesador powermill 5 axes for mach3

Anonymous — Fri, 28 Sep 2018 19:38:57 GMT

Thank you very much for your reply
X axis 600 mm
Y axis 300 mm
Z axis 130 mm
Axis 240 Degrees
B axis 360 Degrees
Mach3 control software

5 continuous axes

again I thank you very much for your valuable help
att Pedro Pineda

Re: Postprocesador powermill 5 axes for mach3

thaont.cnc — Sat, 29 Sep 2018 12:53:05 GMT

You contact my email: thaont.cnc@gmail.com

Re: Postprocesador powermill 5 axes for mach3

powercam.ir — Sat, 29 Sep 2018 20:41:29 GMT

Hi
Please specify the distance between the two centers of the Rotary axis, in accordance with the image shown.

Consider the center and surface of table B as zero, and get the position of the center of the RA era in the image.

Consider the center and surface of table B as zero, and position the center of the A Rotary period as shown.

Re: Postprocesador powermill 5 axes for mach3

Anonymous — Sun, 30 Sep 2018 15:53:02 GMT

good day
attached image with the measures q asked me
thank you very much

Re: Postprocesador powermill 5 axes for mach3

powercam.ir — Sun, 30 Sep 2018 19:39:08 GMT

ok. I sent the files to your email. Use the simplest piece to test the post. For example, a few holes on a polygon.

Re: Postprocesador powermill 5 axes for mach3

Anonymous — Sun, 30 Sep 2018 21:00:04 GMT

Hi good day
the files have not arrived to my mail
Pedropin20@hotmail.com
thank you very much

Re: Postprocesador powermill 5 axes for mach3

Anonymous — Thu, 04 Oct 2018 08:28:59 GMT

Please send me this post processor

my email - mraungkohein7@gmail.com

Thank you 😊

Re: Postprocesador powermill 5 axes for mach3

Anonymous — Thu, 04 Oct 2018 10:52:54 GMT

Please send me

my email - mraungkohein7@gmail.com

thank

Re: Postprocesador powermill 5 axes for mach3

Anonymous — Sat, 12 Oct 2019 05:38:16 GMT

Please send me top this postprocessor, my mail Is danielebettin.ufficio@gmail.com

Thank you!

Re: Postprocesador powermill 5 axes for mach3

Meysam_Ghorbani — Sat, 12 Oct 2019 05:46:46 GMT

YOU CAN SEE THE BELOW CLIP

https://www.youtube.com/watch?v=QAFSXFdFQOg&t=97s

Re: Postprocesador powermill 5 axes for mach3

RenatoHF — Sun, 01 Nov 2020 18:47:57 GMT

Can you send to my a powermill post processing from mach3 5 axis trunnion layout? I'm from Brazil. Thanks