topic Re: PowerMill 2025 in PowerMill Forum

PowerMill 2025

lawrence.halls83P7Q — Wed, 08 May 2024 12:04:33 GMT

PowerMill 2025 and the PowerMill 2025.0.1 Hot Fix were released today. Over the next few weeks, you will see PowerMill 2025 and PowerMill 2025.0.1 Hot Fix availability in your account. Please check your Autodesk Account or Autodesk Access to see when your entitlement is available for download.

When you install PowerMill 2025, the PowerMill 2025.0.1 Hot Fix should automatically install with it. Alternatively, you can download the PowerMill 2025.0.1 Hot Fix from the Product Updates area of your Autodesk Account. To confirm that you've successfully installed the PowerMill 2025.0.1 Hot Fix, select the ? > About menu option in your PowerMill 2025 software and check that you're working in Version: 2025.0.1.2025012.

In the meantime, you can review the Help and Release Notes to see what is being delivered in PowerMill 2025 and the PowerMill 2025.0.1 Hot Fix.

Thank you

Re: PowerMill 2025

iamcdn79 — Wed, 08 May 2024 13:55:13 GMT

In the release notes it says entities can now be copied and pasted between separate instances of Powermill. Does this mean toolpaths? I've noticed that when I right-click on a toolpath there is a new option called "export to clipboard" When I do that I don't see an option of pasting the toolpath into a new Powermill window

Re: PowerMill 2025

ken.poyner — Wed, 08 May 2024 15:07:11 GMT

The pasting of entities is on the backstage view (since we don't know the entity type that was copied from the RMB)

But yes, you can copy toolpaths with this! (I just tested this myself)

Re: PowerMill 2025

iamcdn79 — Wed, 08 May 2024 15:21:01 GMT

Very good, tested it and it works just couldn't find the paste option. I've been wanting that feature for a long time.

Another question is I have Powermill 2024 icon pinned to my taskbar but when I open Powermill 2025 it uses the same icon, how can I separate them? In the attached pic I have 2024 and 2025 both open but they are using the same pinned icon.

Re: PowerMill 2025

iamcdn79 — Wed, 08 May 2024 19:31:18 GMT

@iamcdn79 wrote:
Another question is I have Powermill 2024 icon pinned to my taskbar but when I open Powermill 2025 it uses the same icon, how can I separate them? In the attached pic I have 2024 and 2025 both open but they are using the same pinned icon.

Nevermind, figured it out. But opening 2025 still uses the 2024 icon

Re: PowerMill 2025

ken.poyner — Thu, 09 May 2024 07:24:59 GMT

Apologies I'm not sure if it's possible. It looks like at least as far back as the 2023 version this issue was present. Do you know if this is a new issue to you?

Re: PowerMill 2025

ken.poyner — Thu, 09 May 2024 09:13:03 GMT

I've opened PMILL-22401 for the taskbar issue to be looked into.

Re: PowerMill 2025

matthew8L7RE — Thu, 09 May 2024 18:27:44 GMT

Can you change the position of the "Export to Clipboard" inside the sub-menus? Years of muscle memory takes me to the top of many of the sub-menus, and now I will be accidentally clicking "Export to Clipboard" anytime I try to enter the "Workplane Editor" or "Simulate from Start" in the toolpath.

Re: PowerMill 2025

iamcdn79 — Thu, 09 May 2024 18:38:07 GMT

LOL I was running into the same issue for "Simulate from Start" in the toolpath

Re: PowerMill 2025

evo80 — Fri, 10 May 2024 13:18:21 GMT

Haha, Me too

Re: PowerMill 2025

iamcdn79 — Fri, 10 May 2024 14:55:44 GMT

If they put it into the same location as the NC Program that would be better and more consistent

Re: PowerMill 2025

thinhvan.nguyen — Mon, 13 May 2024 09:40:34 GMT

the new function "Export to clipboard" just applies to individual entities.

For example: I have 5 toolpaths. How can I copy and paste all in 1 time?

Re: PowerMill 2025

icse — Mon, 13 May 2024 11:57:15 GMT

You could do this with a macro

Re: PowerMill 2025

thinhvan.nguyen — Tue, 14 May 2024 01:21:16 GMT

Hi @icse

I can make a macro to select toolpaths and export them to the clipboard, But I'm getting stuck on importing them into another instance of PowerMill. Do you have any code to resolve this?

Re: PowerMill 2025

nguyenthinhvt95 — Tue, 14 May 2024 04:07:40 GMT

I can not explore a folder after Import entity.

This is a bug?

Re: PowerMill 2025

ken.poyner — Tue, 14 May 2024 07:37:28 GMT

Oh dear, I've opened PMILL-22407 for that bug. I did find that creating another toolpath forces the copied toolpath to appear at least.

Re: PowerMill 2025

peter.lockyer — Tue, 14 May 2024 08:22:04 GMT

Thanks for this feedback everyone, it helps us make the product better. I can see that we've been a little inconsistent in how we positioned the 'Export to Clipboard' item, and also having it as the very top item for Toolpaths and Workplanes isn't overly helpful. I've opened PMILL-22408 to address this. I've attached an image showing the changes I plan we'll make.

Re: PowerMill 2025

icse — Tue, 14 May 2024 09:48:50 GMT

I Use this macro the export the entities as a powermill project:

if length(project_pathname(0)) == 0 OR project_modified() == 1 { message warn 'Save First' return } string $path = "C:/Temp/EntityExport" if dir_exists($path) { bool $query = 0 $query = query "Replace existing Entities?" if $query { delete directory $path } else { return } } string list $inputTypes = {'toolpath','tool','boundary','pattern','featureset','workplane'} int list $indexer = input choice multiple $inputTypes 'Typen Waehlen' entity list $entitiesToExport = {} foreach $index in $indexer { entity list $entities = {} SWITCH $index { Case 0 $entities = input entity multiple toolpath 'Werkzeugwege Waehlen' Break Case 1 $entities = input entity multiple tool 'Werkzeuge Waehlen' Break Case 2 $entities = input entity multiple boundary 'Grenzlinien Waehlen' Break Case 3 $entities = input entity multiple pattern 'Muster Waehlen' Break Case 4 $entities = input entity multiple featureset 'Featuresets Waehlen' Break Case 5 $entities = input entity multiple workplane 'Arbeitsebene Waehlen' Break DEFAULT return BREAK } foreach $ent in $entities { int $i = add_last($entitiesToExport, $ent) } } mkdir $path //Active entity file string $activeEntityFilePath = $path + '/active_entity.pmldat' string $op = '0 1 # Active Entities (DO NOT EDIT!)' if file_exists($activeEntityFilePath) { delete File $activeEntityFilePath } file open $activeEntityFilePath for write as output file write $op to output file close output int $entCount = 0 string $content = '' foreach $e in $entitiesToExport { if entity_exists($e) { if $e.RootType == 'toolpath' { string $eHash = "x" + $e.ID + ".pmlent" string $e_full = project_pathname(0) + "/" + $eHash string $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntToolpath '" + $e.Name + "'" + CRLF } copy file $e_full $path_full $eHash = "x" + $e.ID + ".pmlgeom" $e_full = project_pathname(0) + "/" + $eHash $path_full = $path + "/" + $eHash copy file $e_full $path_full if entity_exists($e.Boundary) { $eHash = "x" + $e.Boundary.ID + ".pmlent" $e_full = project_pathname(0) + "/" + $eHash $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntBoundary '" + $e.Boundary.Name + "'" + CRLF } copy file $e_full $path_full } if entity_exists($e.Pattern) { $eHash = "x" + $e.Pattern.ID + ".pmlent" $e_full = project_pathname(0) + "/" + $eHash $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntPattern '" + $e.Pattern.Name + "'" + CRLF } copy file $e_full $path_full } if entity_exists($e.Tool) { $eHash = "x" + $e.Tool.ID + ".pmlent" $e_full = project_pathname(0) + "/" + $eHash $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntTool '" + $e.Tool.Name + "'" + CRLF } copy file $e_full $path_full } if entity_exists($e.Workplane) { $eHash = "x" + $e.Workplane.ID + ".pmlent" $e_full = project_pathname(0) + "/" + $eHash $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntWorkplane '" + $e.Workplane.Name + "'" + CRLF } copy file $e_full $path_full } if entity_exists($e.Featureset) { $eHash = "x" + $e.Featureset.ID + ".pmlent" $e_full = project_pathname(0) + "/" + $eHash $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntFeature '" + $e.Featureset.Name + "'" + CRLF } copy file $e_full $path_full } continue } if $e.RootType == 'boundary' { string $eHash = "x" + $e.Boundary.ID + ".pmlent" string $e_full = project_pathname(0) + "/" + $eHash string $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntBoundary '" + $e.Name + "'" + CRLF } copy file $e_full $path_full continue } if $e.RootType == 'pattern' { string $eHash = "x" + $e.Pattern.ID + ".pmlent" string $e_full = project_pathname(0) + "/" + $eHash string $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntPattern '" + $e.Name + "'" + CRLF } copy file $e_full $path_full continue } if $e.RootType == 'tool' { string $eHash = "x" + $e.Tool.ID + ".pmlent" string $e_full = project_pathname(0) + "/" + $eHash string $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntTool '" + $e.Name + "'" + CRLF } copy file $e_full $path_full continue } if $e.RootType == 'workplane' { string $eHash = "x" + $e.Workplane.ID + ".pmlent" string $e_full = project_pathname(0) + "/" + $eHash string $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntWorkplane '" + $e.Name + "'" + CRLF } copy file $e_full $path_full continue } if $e.RootType == 'featureset' { string $eHash = "x" + $e.Featureset.ID + ".pmlent" string $e_full = project_pathname(0) + "/" + $eHash string $path_full = $path + "/" + $eHash if not file_exists($path_full) { $entCount = $entCount + 1 $content = $content + $eHash + " pmlEntFeature '" + $e.Name + "'" + CRLF } copy file $e_full $path_full continue } } } if file_exists($activeEntityFilePath) { delete File $activeEntityFilePath } file open $activeEntityFilePath for write as output file write $op to output file close output string $proj_name = "\" + project_pathname(1) + ".pmlprj" string $path_full = project_pathname(0) + $proj_name file open $path_full for read as input string $line1 = '' string $line2 = '' string $line3 = '' file read $line1 from input file read $line2 from input file read $line3 from input file close input $line1 = $entCount + substring($line1, position($line1, ' ', 0), length($line1)) string $dest_path_full = $path + $proj_name file open $dest_path_full FOR WRITE AS output file write $line1 to "output" file write $line2 to "output" file write $line3 to "output" file write $content to "output" file close output

then in any other powermill project i run this macro to import the project:

bool $query = 0 $query = query "Import Entities?" if not $query { return } string $path = "C:/Temp/EntityExport" if not dir_exists($path) { message warn "Project not found" macro abort } if length(project_pathname(0)) == 0 OR project_modified() == 1 { bool $save = 0 $save = query 'Save?' if $save { project save } else { macro abort } } PROJECT IMPORT PROJSELECTOR $path

It does not support all entity types but missing ones could be added.

Re: PowerMill 2025

nguyenthinhvt95 — Wed, 15 May 2024 01:24:49 GMT

@icse

Oh, that be awesome. It's working well. I even can run in the older version.

Re: PowerMill 2025

Sean571 — Wed, 15 May 2024 16:28:23 GMT

@thinhvan.nguyen You can do this by putting the toolpaths into a Group and exporting the Group, or by adding them to an NC Program and Exporting the NC Program. No Macro needed that way