topic Re: BUG 2019.2 - Default surface thickness in PowerMill Forum

BUG 2019.2 - Default surface thickness

rafael.sansao — Thu, 28 Feb 2019 23:48:49 GMT

If there is an active toolpath when changing the default surface thickness, the Powermill 2019.2 displays a message and invalidates the toolpath.
If the user clicks on yes or the enter key, several toolpaths can be accidentally invalidated and without any need. This is clearly a bug.

If no toolpath is active, everything works fine.

See attached videos.

ID case: 15117575

Re: BUG 2019.2 - Default surface thickness

iamcdn79 — Fri, 01 Mar 2019 00:44:36 GMT

In 2018 or earlier would it not invalidate the toolpath as well?

Re: BUG 2019.2 - Default surface thickness

rafael.sansao — Fri, 01 Mar 2019 00:49:23 GMT

No.

This only happens in 2019.2

I'm editing the default surface thickness and not the surface thickness of the toolpath.

Re: BUG 2019.2 - Default surface thickness

rafael.sansao — Fri, 01 Mar 2019 03:32:20 GMT

Development team task: PMILL-10436