Post Issue-Change a drilling retract feedrate to imperial

evo80 — Thu, 05 Dec 2019 14:12:00 GMT

Good Day,

I wonder if someone could help me with my post.

I'm drilling using linear moves and a feedrate retract.

When I post I'm expecting to see a retract feedrate of F200 (Heidenhain) but its posting in metric F508.

What is it in the post I have to change to get that retract in imperial?

67      Q1=172.4 ; PLUNGE FEEDRATE
68      Q2=181.5 ; CUTTING FEEDRATE 
69 ;  FMAX WILL BE USED FOR SKIM AND RAPID FEEDRATES
70 ;
71 CYCL DEF 32.0 TOLERANCE
72 CYCL DEF 32.1 T0.0005
73 CYCL DEF 32.2 HSC-MODE:0 TA0.1
74 ;
75 L X7.9785 Y-12.7 FMAX 
76 L Z15.375 FMAX 
77 M7
78 L Z4.22627 R0 FMAX 
79 L Z-1.38725 FQ2 
80 L Z4.22627 F508 
81 L Z15.375 FMAX 
82 ; TOOLPATH END

Re: Post Issue-Change a drilling retract feedrate to imperial

iamcdn79 — Thu, 05 Dec 2019 14:53:39 GMT

Check to see if your imperial scale factor is set to 2.54 in your post for linear moves and your drilling feedrate. If it is set it to 1

topic Post Issue-Change a drilling retract feedrate to imperial in PowerMill Forum

Post Issue-Change a drilling retract feedrate to imperial

Re: Post Issue-Change a drilling retract feedrate to imperial