topic Re: PowerMill Start to Part II: 2.5D “Curve VS Feature” Machining in PowerMill Forum

PowerMill Start to Part II: 2.5D “Curve VS Feature” Machining

aaron.kennette — Tue, 28 Apr 2020 00:22:18 GMT

Join us for the continuation of our PowerMill 2D machining webinar, scheduled to begin at 1pm EST on Tuesday, April 28, 2020.

Mike Belanger will quickly recap the first segment on drilling automation, and then demonstrate the programming of various 2.5D pockets and slots with emphasis on “Curve Machining” versus “Feature Milling”. Learn the validity of both options and recognize which one will find you increased efficiency and ease of use. Finish your 2D and plate work faster with easy to learn programming.

Comments and questions will be collected throughout this 30-minute presentation and addressed during the 10 minute Q&A portion. Thank you for your interest

Click here to Register

Re: PowerMill Start to Part II: 2.5D “Curve VS Feature” Machining

Pijetro — Tue, 28 Apr 2020 11:27:50 GMT

Any way to link Pt1, and Pt2?

I cannot be here for today's webinar unfortunately..

Re: PowerMill Start to Part II: 2.5D “Curve VS Feature” Machining

j.lacrasse — Wed, 29 Apr 2020 12:07:16 GMT

Hi @aaron.kennette

Where can we watch this webinar if we missed it?

Re: PowerMill Start to Part II: 2.5D “Curve VS Feature” Machining

aaron.kennette — Wed, 29 Apr 2020 12:44:20 GMT

Hello,

Did you register for the Webinar? If so, under which name so I can look up your contact details and have the information sent to you.

Thanks,

Aaron

Re: PowerMill Start to Part II: 2.5D “Curve VS Feature” Machining

aaron.kennette — Wed, 29 Apr 2020 12:47:46 GMT

Hello,

Did you register for the webinar? If so, under which name so we can look up your contact details and have the info sent to you?

Thanks,

Aaron

Re: PowerMill Start to Part II: 2.5D “Curve VS Feature” Machining

j.lacrasse — Wed, 29 Apr 2020 13:15:10 GMT

Hi @aaron.kennette ,

I sent you a private message.

Re: PowerMill Start to Part II: 2.5D “Curve VS Feature” Machining

Pijetro — Wed, 29 Apr 2020 13:34:06 GMT

I did not sign in, since it was a moot point....

However, it would be nice if these webinars were all forced to be centrally located....

For example here....

https://www.autodesk.com/campaigns/design-manufacturing-events/cam?mktvar002=741318&utm_medium=email&utm_source=newsletter&utm_campaign=amer-mfg-imts-2018-preshow-marketing&utm_id=741318&leadid=302534791&mkt_tok=eyJpIjoiT0RBME9HSTNNbUptT1dSaCIsInQiOiJBUFJuTWdaMlwvMHpRclJJazNBd1RjazMxU1AraldcLzJja1B2RUV0S0g0WWxHK2EydFVsbENXQmxObjZPaytLZk9YXC9od3FOSkthT0F5U3hNanpYTUc0bjdiazNiY2gzQjdvdXprRnZFZzFGbkJONEpKVDRpZ1ZCbW9KNFwvYVIyUHYifQ%3D%3D

Re: PowerMill Start to Part II: 2.5D “Curve VS Feature” Machining

gosmann.andreas — Sun, 03 May 2020 13:50:07 GMT

take a look at the youtube channel there a the Videos.

https://www.youtube.com/channel/UCPp-UGkN6A8baOZWqo2GPqQ/search?query=powermill