topic Connection Protocol for OMV with Hurco 5 Axis Machines [VMXUDi / SRTi] in PowerInspect Forum

Connection Protocol for OMV with Hurco 5 Axis Machines [VMXUDi / SRTi]

M_ShaikhKN6YT — Mon, 24 Nov 2025 15:32:15 GMT

What is the connection protocol to setup a OMV on powerinspect for 42 VMXUDi / SRTI machines. I reviewed a few topics and found I++ as a portal to setup a CNC machine. But still, there's no clarity available of how I would connect and post a NC File to run a verification program on the machine.

I have had some experience in connecting surface inspect from Fusion on Hurco Machines, through defining global variables with probe calibration data, but there's no such clarity for a connection with PowerInspect.

Re: Connection Protocol for OMV with Hurco 5 Axis Machines [VMXUDi / SRTi]

serge.quiblier — Tue, 25 Nov 2025 13:01:32 GMT

We never provided such functionnality with PowerInspect.

By default a pmoptz post will generate a gcode that will be run on the machine.

This is generating a output file using POPEN, then DPRNT for the output.

This will generate a file on the controller.

On a Fanuc controller depending on the I/O settings, it can sent the file to a serial port, or the Ethernet connection.

I can't remember if such settings exists on the Hurco controller.

But for sure, it won't use I++. You don't drive the machine like a CMM.

The probing program define the actions, and generate a result.

Regards

Re: Connection Protocol for OMV with Hurco 5 Axis Machines [VMXUDi / SRTi]

M_ShaikhKN6YT — Fri, 28 Nov 2025 13:01:47 GMT

Hi Serge, Thanks for the reply. I would appreciate a clarity on the following, I am using PowerInspect Ultimate,

Are there posts available from the software to create a NC program for Hurco machines, if not what am I supposed to do?

I am not concerned for sharing files to the controller I can open and run the NC File on connected server from my computer to the Machine, I would like a guideline on running the software for OMV Inspection, and availability of Posts for Hurco Machines.

Thanks

Re: Connection Protocol for OMV with Hurco 5 Axis Machines [VMXUDi / SRTi]

kundlikSN6T9 — Tue, 02 Dec 2025 09:06:47 GMT

Post is not available from software to create NC program for Herco machine. For this you can contact any Autodesk partner.

Re: Connection Protocol for OMV with Hurco 5 Axis Machines [VMXUDi / SRTi]

serge.quiblier — Tue, 02 Dec 2025 09:31:17 GMT

Hi @M_ShaikhKN6YT

These posts are not included in the PowerInspect installation package.

It was a paid service, previously provided by Autodesk.

Nowadays, you can contact an Autodesk reseller. Some will be able to provide that service.

Cheers