topic Re: Text Position change in ObjectARX Forum

Text Position change

Anonymous — Mon, 25 Apr 2016 13:05:49 GMT

Hello,

I want to change the text position in the drawing that the other application made.

However, it doen't work pText->setPosition(). (setRotation is working).

In the properties, the geometry (position X/Y/Z) is grayed out and "apply" button is grayed out also.

What I have to change to do in first?

in the command windows, (entget (car (entsel))) is as follows.

Command: (entget (car (entsel)))
Select object: ((-1 . <Entity name: 7ffffb0c6e0>) (0 . "TEXT") (330 . <Entity name: 7ffffb069f0>) (5 . "37E6") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 . "AS_LAB") (62 . 4) (100 . "AcDbText") (10 811.124 648.269 0.0) (40 . 2.5) (1 . "50-SW-45532-S3A-5L") (50 . 5.45614) (41 . 1.0) (51 . 0.0) (7 . "romans") (71 . 0) (72 . 4) (11 827.56 632.25 0.0) (210 0.0 0.0 1.0) (100 . "AcDbText") (73 . 0))

Thanks,

CH Lee

Re: Text Position change

artc2 — Mon, 25 Apr 2016 16:52:46 GMT

If your text is anything other than baseline left justified, then you need to set the alignment point rather than the position point. The text data you show is for text that has baseline middle justification, so it needs to have its alignment point set instead of position point.

Re: Text Position change

Anonymous — Mon, 25 Apr 2016 23:09:07 GMT

Thank you for your kind reply.

It works fine.

Thanks,

CH Lee