https://forums.autodesk.com/t5/net-forum/attributereference-textstring-mtextattribute/m-p/3375545#M56767 <P>hi, check setting for systemvariable UNITMODE which "controls the display format for units", if it's 1, set to 0. (default is 0 though, worth a try, maybe?) felix</P> Sun, 18 Mar 2012 17:50:38 GMT Anonymous 2012-03-18T17:50:38Z https://forums.autodesk.com/t5/net-forum/attributereference-textstring-mtextattribute/m-p/3375013#M56766 <P>I am using MTextAttributes to store imperial lengths in the drawing, feet inches and fractions (stacked).&nbsp; When I read back the TextString property which, is&nbsp;the MtextAttribute.Contents parsed, I am having problems because the parser does not add a space between the inch and the fraction.&nbsp;&nbsp;So, is&nbsp;there any setting that could be used to tell the parser to add the space between the inch and the fraction?&nbsp; I will really appreciate any help.</P> Fri, 16 Mar 2012 22:21:35 GMT https://forums.autodesk.com/t5/net-forum/attributereference-textstring-mtextattribute/m-p/3375013#M56766 HJohn1 2012-03-16T22:21:35Z https://forums.autodesk.com/t5/net-forum/attributereference-textstring-mtextattribute/m-p/3375545#M56767 <P>hi, check setting for systemvariable UNITMODE which "controls the display format for units", if it's 1, set to 0. (default is 0 though, worth a try, maybe?) felix</P> Sun, 18 Mar 2012 17:50:38 GMT https://forums.autodesk.com/t5/net-forum/attributereference-textstring-mtextattribute/m-p/3375545#M56767 Anonymous 2012-03-18T17:50:38Z