topic Re: how to select a specific line in .NET Forum

how to select a specific line

mecoman6GF27 — Fri, 09 Oct 2020 16:26:19 GMT

Hello everybody.
Can anyone explain to me how I can select a specific line that is on a certain layer?
I specify that the layer was used to draw a lot of lines.
Thanks a lot, bye.

Re: how to select a specific line

devitg — Fri, 09 Oct 2020 23:01:31 GMT

@mecoman6GF27 For better understanding, and maybe get further help, please upload such sample.dwg

What condition shall the LINE comply. ?

Re: how to select a specific line

mecoman6GF27 — Sat, 10 Oct 2020 08:00:49 GMT

Hi devitg, thanks for the reply.
The line to be selected has no particular conditions to be respected. I can tell you that it is on a layer called "A1" but on the same layer there are many other lines. I would like to select only one of these lines to change the coordinates of the end point.

.Re: how to select a specific line

SEANT61 — Sat, 10 Oct 2020 10:24:43 GMT

Explore this thread for any pertinent information:

https://forums.autodesk.com/t5/net/selecting-based-on-layer/m-p/6696802

Re: how to select a specific line

devitg — Sat, 10 Oct 2020 13:47:21 GMT

@mecoman6GF27 , please apologize me , i did not notice that it was a no lisp question . I handle lisp

Re: how to select a specific line

mecoman6GF27 — Thu, 29 Oct 2020 14:58:55 GMT

Hello everyone and thanks for the replies.
I have read the information on the link that @SEANT61 recommended me but it talks about all the objects that are on a specific layer. I would like to select only one object of a layer and not all.

Re: how to select a specific line

SEANT61 — Sun, 11 Oct 2020 09:42:47 GMT

@mecoman6GF27 wrote:
Hello everyone and thanks for the replies.
I have read the information on the link that SEANT61 recommended me but it talks about all the objects that are on a specific layer. I would like to select only one object of a layer and not all.

Re-read the thread and test the code sample. Using specific properties of PromptSelectionOptions the Editor.GetSelection method can be set up to limit selection to one entity, using filtered criteria.

Re: how to select a specific line

mecoman6GF27 — Wed, 30 Jun 2021 08:48:18 GMT

Hello everybody. I apologize if I re-open this discussion after several months.
With the following code I have selected the line. Now how do I change the coordinates of the end point of the line?
Hi, thank you very much.

Private Sub B_Select_Click(sender As Object, e As EventArgs) Handles B_Select.Click Dim doc As Document = Application.DocumentManager.MdiActiveDocument Dim ed As Editor = doc.Editor Dim tvs() As TypedValue tvs = New TypedValue() { New TypedValue(DxfCode.Operator, "<or"), New TypedValue(DxfCode.Operator, "<and"), New TypedValue(DxfCode.Start, "CIRCLE"), New TypedValue(DxfCode.Operator, ">="), New TypedValue(DxfCode.Real, 10.0), New TypedValue(DxfCode.Operator, "and>"), New TypedValue(DxfCode.Operator, "or>") } Dim sf As SelectionFilter = New SelectionFilter(tvs) Dim psr As PromptSelectionResult = ed.SelectAll(sf) ed.WriteMessage("Id Object: " & psr.Value.GetObjectIds(0).ToString) End Sub

Re: how to select a specific line

_gile — Wed, 30 Jun 2021 11:20:31 GMT

The code you posted select all the circles with a radius greater or equal to 10.0 units.

Circles are not lines and do not have end point.

Re: how to select a specific line

mecoman6GF27 — Wed, 30 Jun 2021 14:26:55 GMT

Sorry, in the code I posted I selected all the circles instead of the lines. If in that code I wanted to change the radius of the circles what should I do?
Thanks a lot, bye.

Re: how to select a specific line

_gile — Wed, 30 Jun 2021 15:43:41 GMT

It's the same process for editing any DBObject:

Start a Transaction.
Open the object for write from its ObjectId.
Edit its properties.
Commit the Transaction to save the changes.

You should read this section of the documentation and all the related topics.

Re: how to select a specific line

mecoman6GF27 — Sat, 03 Jul 2021 08:23:53 GMT

Hello.
Can you write an example that I can take inspiration from? I would be very grateful to you.

Re: how to select a specific line

_gile — Sat, 03 Jul 2021 16:05:22 GMT

[CommandMethod("TEST")] public static void Test() { var doc = AcAp.DocumentManager.MdiActiveDocument; var db = doc.Database; var ed = doc.Editor; // Selection filter to select all the circles with a radius greater or equal to 10.0. var filter = new SelectionFilter(new[] { new TypedValue(0, "CIRCLE"), new TypedValue(-4, ">="), new TypedValue(40, 10.0) }); var selection = ed.SelectAll(filter); if (selection.Status == PromptStatus.OK) { // Start a transaction using (var tr = db.TransactionManager.StartTransaction()) { // Loop for each selected object foreach (var id in selection.Value.GetObjectIds()) { // Open the circle for write var circle = (Circle)tr.GetObject(id, OpenMode.ForWrite); // Change the radius to 15.0. circle.Radius = 15.0; } // Save the changes tr.Commit(); } } }

Re: how to select a specific line

mecoman6GF27 — Tue, 06 Jul 2021 14:46:38 GMT

Hi _gile, thank you very much for your help. You helped me a lot.
Bye.