topic Re: Product Update: Navisworks 2025 Update 2 - What's New in Navisworks Forum

Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Thu, 13 Jun 2024 09:30:27 GMT

Hello,

Today we have released update 2 for Navisworks 2025. This update has been focused on fixing the most common issues found in Navisworks 2025 and 2025 update 1. This release was planned and monitored for all incoming issues ensuring Navisworks 2025 is as stable as possible. This was a smaller targeted release ensuring we are confident with the stability of the product for our users.

Stability and Defects

IFC files

Resolved an issue where IFC files would not load or load incorrectly. This was affecting IFC files loaded into Navisworks 2025 update 1.

SKP files

Resolved an issue where certain .skp files did not load.

DWG files

Resolved an issue when loading DWG files with missing xrefs and object enablers installed.

Development focus

As the Product Manager for Navisworks I, and all the team are committed to improving the product in all aspects. We begin looking to the future and specifically Navisworks 2026 and the exciting updates and improvements we have planned. We will continue to monitored previous supported versions and provide updates when required.

We'd love to hear from you, please feel free to reach out to me directly or via account teams.

Regards

Re: Product Update: Navisworks 2025 Update 2 - What's New

alexisDVJML — Fri, 21 Jun 2024 10:47:58 GMT

Great to hear Navisworks got some update.

However switching to a new version is always a hard decision when using Plugins since these requires to be recompiled/modified/tested/distributed and thus requires a company-wide decision.

So at least please ensure links to install/reinstall past version as far back as possible are still available.

Thanks.

Re: Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Fri, 21 Jun 2024 11:35:11 GMT

Thanks for the feedback. We understand how difficult it can be with all the connected parts of an install. We keep the current and last 3 years version of the product available via the Autodesk products page. If you require older than that you will need to log a support ticket who should be able to provide access.

Regards

Re: Product Update: Navisworks 2025 Update 2 - What's New

alexisDVJML — Sun, 23 Jun 2024 13:28:59 GMT

Noted.
Thanks for the prompt reply, appreciated!

Re: Product Update: Navisworks 2025 Update 2 - What's New

jason.johnson3PJE7 — Tue, 25 Jun 2024 15:01:10 GMT

Is this update available for Freedom, too? The official download page only has update 1 available.

Re: Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Tue, 25 Jun 2024 15:24:52 GMT

We are working to make this available on the downloads page ASAP. If this is installed and you have the Autodesk Access app on your PC you should see the update available for Freedom already. Taking a little longer with publishing to the site.

Regards

Re: Product Update: Navisworks 2025 Update 2 - What's New

marco_volkert — Tue, 13 Aug 2024 08:51:58 GMT

"If this is installed and you have the Autodesk Access app on your PC you should see the update available for Freedom already." ... indeed, employees with Freedom 2025.1 seeing it in Autodesk Access app, but they are not allowed to install software where elevated rights are needed. Means, I need the package to prepare to our deployment solution 😉

As it seems, Autodesk has the pack available ... how hard is it to put it on publish site?

Re: Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Tue, 13 Aug 2024 11:23:52 GMT

Sorry, this should have been deployed within a week or so of my comment. I had not realised it had not gone to the downloads site. I have chased this for deployment.

Sorry for the delay.

Regards

Re: Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Tue, 13 Aug 2024 13:05:36 GMT

I have confirmed with the development team that there was nothing in 2025.2 that affected Freedom and thus updating does not change anything for Freedom. Update 1 can stay until a future update, rather than update or waiting for the download.

Regards

Re: Product Update: Navisworks 2025 Update 2 - What's New

marco_volkert — Tue, 13 Aug 2024 13:44:49 GMT

Got it ... it still confuses users when Autodesk Access is telling them there is an update for Navisworks Freedom.

Re: Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Tue, 13 Aug 2024 13:52:16 GMT

Agreed, I have this clarified as a deployment mistake, we will be more selective in future to ensure there isn't any confusion.

Regards

Re: Product Update: Navisworks 2025 Update 2 - What's New

BI_met — Mon, 07 Oct 2024 09:02:10 GMT

Hello @brett_parkerLUEP7, the "internal Navisworks GUID" that Quantification tool uses, is missing when importing IFC in v4 method. We get an error of invalid GUID. Please, could you fix this problem with Ifc files? Thanks.

Re: Product Update: Navisworks 2025 Update 2 - What's New

irsanachmad_work — Fri, 13 Dec 2024 15:10:11 GMT

same issue here...is there any solution? v4 has great translation of IFC color and model structure, more accurate, love it...just missing GUID, unfortunately this become big problem because we cannot use it for Quantification...meanwhile V3 not good enough translate multiple color for single IFC element, but still get GUID...i wonder there is V5 solve everything...

Re: Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Fri, 13 Dec 2024 15:15:41 GMT

Hello,

This issue is now resolved in the latest version of Navisworks (Update 3). This wasn't a translator issue (v3 or v4) but rather a bug that was preventing them in this version. Now resolved.

Release notes here

Regards

Re: Product Update: Navisworks 2025 Update 2 - What's New

irsanachmad_work — Sat, 14 Dec 2024 03:11:37 GMT

Hi Brett,
thanks for your quick response,
we have tried Naviswork update3, unfortunately the issue still persists, to make the comparison clearer, we tried to create a simple model like this:
figure 1 (Original model view in Authoring soft)
figure 1 (Original model view in Authoring soft)

figure 2 (Naviswork 2025, ifc translator v3, model reading)

figure 2 (Naviswork 2025,ifc translator v3, model reading)

figure 3 (Naviswork 2025, ifc translator v3, GUID data reading)

figure 3 (Naviswork 2025,ifc translator v3, GUID data reading)

figure 4 (Naviswork 2025, ifc translator v4, model reading)
figure 4 (Naviswork 2025,ifc translator v4, model reading)

figure 5 (Naviswork 2025, ifc translator v4, GUID data reading)

figure 5 (Naviswork 2025,ifc translator v4, GUID data reading)

here we also include the .ifc file, maybe it can be evaluated.
thanks

regards

Re: Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Tue, 17 Dec 2024 11:53:28 GMT

Thank you for the additional information. Can you review this forum post and apply the fix provided by Shayne. Please confirm if this resolved the issues you are seeing.

Re: Product Update: Navisworks 2025 Update 2 - What's New

irsanachmad_work — Wed, 18 Dec 2024 15:59:55 GMT

Hi Brett, thanks for information...
quick report:
we use patch provided by Shayne, and tested it, unfortunately, we still got the problem with missing GUID,
-multiple color surface for single IFC object = working great
-structure .ifc model = working great
-property set structure = minus missing GUID
we hope this become priority target list in next update...

thanks,
regards,

Re: Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Wed, 18 Dec 2024 13:14:18 GMT

Thanks for the input and testing. Can you confirm you can see the IFCGUID in the element tab? This replaces the existing Navisworks GUID as this is now the new translator.

Re: Product Update: Navisworks 2025 Update 2 - What's New

irsanachmad_work — Wed, 18 Dec 2024 15:56:07 GMT

We still can't find the IFC GUID in the "item" Properties Tab (v4 translator)...
it makes the Quantify tool not working for all elements,

even for simple single elements (wall without composite)

Re: Product Update: Navisworks 2025 Update 2 - What's New

brett_parkerLUEP7 — Wed, 18 Dec 2024 15:58:11 GMT

This wont appear in the items tab but rather the Element tab;