topic Re: HELP: Find Items issue !!! in Navisworks Forum

HELP: Find Items issue !!!

nlhoang — Fri, 15 Feb 2019 04:49:06 GMT

Hello everybody,

I have problem, please help me.

I have a model steel from Revit and export to NWC then append to Navisworks. I want to find items follow "cut length" value in Revit. But I can't find correct all quantity of some steel object.

Example: as image attached: model has 46 C125x65x6 with cut length=2.542, but have two value in value column. When I find follow 1 value, result is 33 ( correct is 46).

By the way, my task is check quantity of steel model from Revit by Navisworks. So I have idea as above.

Thank you,

Re: HELP: Find Items issue !!!

yurikim — Fri, 15 Feb 2019 07:15:27 GMT

Thank you for your posting @nlhoang.

Is is possible to upload your sample model in here? Or through PM?

Thank you!

Re: HELP: Find Items issue !!!

nlhoang — Fri, 15 Feb 2019 07:22:13 GMT

Hi Yuri Kim,

I attached below.

Thank you,

Re: HELP: Find Items issue !!!

yurikim — Fri, 15 Feb 2019 07:42:24 GMT

Thank you.

Not sure what would be the difference between the beams.. but if you see here, you will get two 2.542 in the selection list. When you add this condition, you will be all 46.

Are the beams on right side has any difference from the rest of the beams?

Re: HELP: Find Items issue !!!

nlhoang — Fri, 15 Feb 2019 07:49:46 GMT

Hi Yuri Kim,

Yes, I try that way, but I have many type of steel and each type have many the same value...so hard for me !

May be have another way to list quantity in Navisworks ?

Thank you.

Re: HELP: Find Items issue !!!

nlhoang — Fri, 15 Feb 2019 07:56:22 GMT

And the beams on right side hasn't any difference from the rest of the beams. They are created by the same family in revit

Re: HELP: Find Items issue !!!

yurikim — Fri, 15 Feb 2019 08:46:05 GMT

As a workaround, please try this:

See if this works. Thank you!

Re: HELP: Find Items issue !!!

nlhoang — Fri, 15 Feb 2019 09:08:12 GMT

Hi Yuri Kim,

Yesss, it's worked.

But you must choose the first and the last value in the list. If not it still not correct the quantity.

Thank you for your understanding and I really appreciate your help in resolving the problem !

Thanks so much.

Re: HELP: Find Items issue !!!

nlhoang — Fri, 15 Feb 2019 09:19:47 GMT

Excuse me @yurikim ,

If you could explain why navisworks create many same value Cut Length like that, I'd be very grateful.

Thanks,

Re: HELP: Find Items issue !!!

brett_parkerLUEP7 — Thu, 14 Dec 2023 15:14:13 GMT

Hello,

This issue has now been address and resolved in Navisworks 2025 (Expected April 2024).

We have made a number of improvements to how the find items properties are managed.

Regards

Re: HELP: Find Items issue !!!

nlhoang — Thu, 28 Dec 2023 09:48:31 GMT

Awesome, thanks for the update.
Thank you for listening and following up on this issue throughout the past 5 years.