https://forums.autodesk.com/t5/mudbox-forum/image-plane/m-p/6876657#M2992 <P>I am not able to position the image plane behind my object. I have set the depth to 1000 (the max), which should normally work. Because this wasn't working I have attempted to reset all of the regular (perspective, top, etc.) cameras. I have also attempted to create a new camera, to switch to that camera's view, and to create an image plane with a depth of 1000--that also did not work. What do I do? Mudbox 2017; technical support wouldn't assist me since Im a student and don't subscribe.</P> Tue, 14 Feb 2017 13:40:12 GMT Anonymous 2017-02-14T13:40:12Z https://forums.autodesk.com/t5/mudbox-forum/image-plane/m-p/6876657#M2992 <P>I am not able to position the image plane behind my object. I have set the depth to 1000 (the max), which should normally work. Because this wasn't working I have attempted to reset all of the regular (perspective, top, etc.) cameras. I have also attempted to create a new camera, to switch to that camera's view, and to create an image plane with a depth of 1000--that also did not work. What do I do? Mudbox 2017; technical support wouldn't assist me since Im a student and don't subscribe.</P> Tue, 14 Feb 2017 13:40:12 GMT https://forums.autodesk.com/t5/mudbox-forum/image-plane/m-p/6876657#M2992 Anonymous 2017-02-14T13:40:12Z https://forums.autodesk.com/t5/mudbox-forum/image-plane/m-p/6878504#M2993 <P>it depends on the size and scale of your object. if your object is really big you might need to go beyond 1000, like maya you can actually enter a number beyond the set slider amount. Another thing you can try is the shortcut key hold e + right click to adjust depth.</P> Wed, 15 Feb 2017 01:58:43 GMT https://forums.autodesk.com/t5/mudbox-forum/image-plane/m-p/6878504#M2993 absoluteKelvin 2017-02-15T01:58:43Z