topic Re: * after Material Trade Name in MOLDFLOW material properties in Moldflow Insight Forum

* after Material Trade Name in MOLDFLOW material properties

rwtechno50 — Mon, 04 Jan 2016 15:33:03 GMT

I need a memory refresh, so please enlighten me again about the meaning of the "*"-asterisk that shows up after a certain few materials' trade names in the MOLDFLOW material database. Thanks!

Re: * after Material Trade Name in MOLDFLOW material properties

kristen.kilroy — Mon, 04 Jan 2016 22:07:17 GMT

Hi @rwtechno50,

The asterisk after a material trade name within Moldflow's material database signifies that material will be phased out in the next release.

I hope this helps!

Regards,

Re: * after Material Trade Name in MOLDFLOW material properties

prabu_Karunakaran — Wed, 13 Jan 2016 10:45:03 GMT

Hi Kristen,

Is there any reason to phased out the material in the next release.

Because we are using some of the material with (*) mark now.

We are going to use the same material next year also.

Also In 2015 version Plexiglas V826 is available but it is not available in 2016 version.

This material doesn't have (*) mark in 2015 version..

Re: MOLDFLOW material properties being REMOVED...WHY?!

rwtechno50 — Tue, 16 Feb 2016 20:12:26 GMT

Kristen,

As I'm sure you saw what prabu.Karunakaran (Enthusiast) posted, I am similarly concerned with existing materials data being eliminated from future MOLDFLOW database versions, especially if *-marked materials are in use today!

First, I'd ask "WHY are these material datasets being removed?" Autodesk should provide AMPLE notiification "ahead of removal time/version" as to the reason for each material's removal from the MOLDFLOW database.

Second, if the removal reason IS "Material is obsolete and no longer manufactured", then is there a way for Autodesk MOLDFLOW Technical Experts in material data characterization to recommend reasonable alternative material datasets that the user might consider for future simulations.

Third, if "NOT OBSOLETE, no longer manufactured" then Autodesk should provide a technical procedure describing exactly how a user might extract the respective material data records from the current data base and enter them as User-Defined material datasets in the versions where removed, especially if these *-marked materials are currently being used in "actual" plastic part designs.

Penny for anyone other user's thoughts regarding this topic????

Regards, Ron White