topic Re: mesh size control in Moldflow Adviser Forum

mesh size control

Anonymous — Tue, 08 Jan 2013 06:58:45 GMT

Autodesk must add the option to control the mesh size also for moldflow adiver package.

All competitors have this option in the basic mudoles & i don't understand why it is not avialble in the moldflow adviser.

Re: mesh size control

nordhb — Wed, 09 Jan 2013 12:41:31 GMT

Hi,
you have an option in process settings, tab Accuracy, to check High Analysis Resolution.
This is a kind of mesh control, which creates a finer mesh with about 2-3x more elements.
(tab Accuracy is to the very right of the tabs, and might be hidden at first sight, use the ">" to the right of tabs to step to the next tabs)

Enabling this option produces a more detailed model that takes more time and resources to analyze.

Use this option to ensure a high analysis resolution for models with a high proportion of small features such as fillets and radii, or if you want to examine highly detailed results.

Hope this helps.

Regards,
Berndt

Re: mesh size control

Anonymous — Wed, 09 Jan 2013 13:17:58 GMT

Hi,

I know about this option, I already tried it & It is not good enough.

Our company manufactures very small parts which requires very high accuracy.

Re: mesh size control

Anonymous — Wed, 16 Jan 2013 10:03:19 GMT

Is there any chance that in the next version it will be avialable?

Re: mesh size control

nordhb — Thu, 17 Jan 2013 06:43:17 GMT

Hi,
to work with meshes in a more controlled and detailed way, you need the next package level of software:
Autodesk Simulation Moldflow Insight.
( see features at: http://usa.autodesk.com/adsk/servlet/pc/compare/index?siteID=123112&id=14920771 )

To control meshes in a more detailed level is not within the scope of Autodesk Simulation Moldflow Adviser.
http://usa.autodesk.com/moldflow/

You can add ideas/suggestions at:
Simulation Moldflow IdeaStation
http://forums.autodesk.com/t5/Simulation-Moldflow-IdeaStation/idb-p/91

Regards,
Berndt