https://forums.autodesk.com/t5/meshmixer-forum/align-models/m-p/9456607#M2606 <P>Unfortunately there's no way to set several pivots as Source or Destination in Align.</P> <P>In MM you could try selection based alignment instead:</P> <P>1. Select small destination areas, Edit/Extract (Offset= 0) and Edit/Separate.</P> <P>2. Set this new object as target (magnet icon in ObjectsBrowser)</P> <P>3. Select corresponding areas on the other mesh and run Edit/AlignToTarget.</P> <P>&nbsp;</P> <P>In Meshlab there's a Align tool which allows multiple point alignment...</P> Mon, 20 Apr 2020 15:39:02 GMT Anonymous 2020-04-20T15:39:02Z https://forums.autodesk.com/t5/meshmixer-forum/align-models/m-p/9456285#M2605 <P>Hello! I have one (i hope that quick) question:</P><P>How can i align two .stl models according to two or more pivots (or any other idea?). 'Align' option allows to fit only one-to-one pivot. F.e. I have two models of the same teeth and I want to matching these.</P><P>Many thanks !</P><P>&nbsp;</P> Mon, 20 Apr 2020 13:54:40 GMT https://forums.autodesk.com/t5/meshmixer-forum/align-models/m-p/9456285#M2605 Anonymous 2020-04-20T13:54:40Z https://forums.autodesk.com/t5/meshmixer-forum/align-models/m-p/9456607#M2606 <P>Unfortunately there's no way to set several pivots as Source or Destination in Align.</P> <P>In MM you could try selection based alignment instead:</P> <P>1. Select small destination areas, Edit/Extract (Offset= 0) and Edit/Separate.</P> <P>2. Set this new object as target (magnet icon in ObjectsBrowser)</P> <P>3. Select corresponding areas on the other mesh and run Edit/AlignToTarget.</P> <P>&nbsp;</P> <P>In Meshlab there's a Align tool which allows multiple point alignment...</P> Mon, 20 Apr 2020 15:39:02 GMT https://forums.autodesk.com/t5/meshmixer-forum/align-models/m-p/9456607#M2606 Anonymous 2020-04-20T15:39:02Z