https://forums.autodesk.com/t5/maya-modeling-forum/edge-loop-problem/m-p/7158628#M18493 <P>Hi!</P> <P>&nbsp;</P> <P>This tool only works correct with 4-sided faces (if more or less edges the loop will not continue).</P> <P>At the front/side you have faces with 6 edges / vertices.</P> Fri, 16 Jun 2017 20:39:32 GMT mspeer 2017-06-16T20:39:32Z https://forums.autodesk.com/t5/maya-modeling-forum/edge-loop-problem/m-p/7157950#M18492 <P>Hi !</P><P>&nbsp;</P><P>The object in the attached scene is just a deformed cube. I tried to insert an edge loop in the "forward" part, but only one face is split ? Yet it works perfectly in other meshes of the same project.</P><P>&nbsp;</P><P>Can you help ?</P><P>&nbsp;</P><P>P.S: Sorry for these naive questions, but there are so many things in Maya...</P> Fri, 16 Jun 2017 16:32:00 GMT https://forums.autodesk.com/t5/maya-modeling-forum/edge-loop-problem/m-p/7157950#M18492 Anonymous 2017-06-16T16:32:00Z https://forums.autodesk.com/t5/maya-modeling-forum/edge-loop-problem/m-p/7158628#M18493 <P>Hi!</P> <P>&nbsp;</P> <P>This tool only works correct with 4-sided faces (if more or less edges the loop will not continue).</P> <P>At the front/side you have faces with 6 edges / vertices.</P> Fri, 16 Jun 2017 20:39:32 GMT https://forums.autodesk.com/t5/maya-modeling-forum/edge-loop-problem/m-p/7158628#M18493 mspeer 2017-06-16T20:39:32Z https://forums.autodesk.com/t5/maya-modeling-forum/edge-loop-problem/m-p/7159077#M18494 <P>Got it, thanks.</P> Sat, 17 Jun 2017 06:09:22 GMT https://forums.autodesk.com/t5/maya-modeling-forum/edge-loop-problem/m-p/7159077#M18494 Anonymous 2017-06-17T06:09:22Z