https://forums.autodesk.com/t5/machining-discussions-forum/cutting-a-grid/m-p/6102681#M7728 <BLOCKQUOTE><TABLE border="1"><TBODY><TR><TH>JKnight-Boyd wrote:</TH></TR><TR><TD><BR />try this<BR />https://drive.google.com/file/d/0B8V9-C4Zko0ZS2lSTHRqZ1p6cGM/view?usp=sharing<BR /><BR />it was too big to uplaod here (just barely)<BR /></TD></TR></TBODY></TABLE></BLOCKQUOTE><BR />I removed the lead-ins&amp;outs(Linking Tab), set the compensation type to off(Passes Tab), so it cuts with the center on the line.<BR />And set the groove cutting to both ways(Passes tab) with stay down off(linking tab).<BR />Send it to your e-mail. Since it was too big. Mon, 16 Mar 2015 14:04:23 GMT Laurens-3DTechDraw 2015-03-16T14:04:23Z