https://forums.autodesk.com/t5/machining-discussions-forum/cutting-a-grid/m-p/6102678#M7725 I lowered the sketch to the correct height and it gives me tool paths.<BR />Now I get tool paths where it will cut right-to-left, then lift and rapid back to the right edge, cut another strip L-to-R, rapid, etc. I'd prefer to cut in an S pattern (every other cut going L-to-R, then R-to-L). But I don't know how to force it to do that. Mon, 16 Mar 2015 13:26:50 GMT Anonymous 2015-03-16T13:26:50Z