https://forums.autodesk.com/t5/machining-discussions-forum/how-can-i-clean-up-tool-list-in-post/m-p/6105129#M7365 <BLOCKQUOTE><TABLE border="1"><TBODY><TR><TH>McConnell wrote:</TH></TR><TR><TD><BR />I'd like to clean up my posts a bit and for starts here is what my tool list currently looks like when i post.<BR /><BR />(T1 D=3. CR=0. - ZMIN=-0.005 - face mill)<BR />(T3 D=0.5 CR=0. - ZMIN=-0.385 - flat end mill)<BR />(T4 D=0.25 CR=0. TAPER=118deg - ZMIN=-0.4501 - drill)<BR />(T5 D=0.25 CR=0. - ZMIN=-0.395 - flat end mill)<BR />(T6 D=0.375 CR=0. TAPER=90deg - ZMIN=-0.255 - spot drill)<BR />(T7 D=0.25 CR=0. TAPER=45deg - ZMIN=-0.15 - chamfer mill)<BR /><BR />I'm not even sure what CR stands for but apparently I like the settings at 0. I really don't think I need to see the zMin or taper either. I'd like to get rid of all that messing looking stuff. Thanks in advance.<BR /></TD></TR></TBODY></TABLE></BLOCKQUOTE><BR /><BR />CR is corner radius.<BR />But it depends on what post you are using what needs to be changed. Tue, 07 Apr 2015 14:42:54 GMT Laurens-3DTechDraw 2015-04-07T14:42:54Z