https://forums.autodesk.com/t5/machining-discussions-forum/profile-cuts/m-p/6077418#M6776 I am trying to profile cut the 2 1/2 wide slots on the edge of them part.&nbsp; I want to have the cutter go inform outside the edge and then cut the arc and then finish the other side of the "U" shape and then pull out.&nbsp; But no matter how I pick the part it wants to do it as a "D" shape cut.&nbsp; The reason I want to do it the way that I posted above is so the cutter will start off the part, then move into the cut and then move off it.&nbsp; Is there a way to get it to do what I want?<BR /><BR /><IMG src="https://dl.dropboxusercontent.com/s/0ofvawso98p36ju/ProfileCut.jpg?dl=0" /> Fri, 15 May 2015 13:58:24 GMT Anonymous 2015-05-15T13:58:24Z