https://forums.autodesk.com/t5/machining-discussions-forum/best-way-to-program-with-a-double-chamfer-mill/m-p/6091174#M5253 I would like to know the best way to program using a double chamfer mill.  Say chamfering the top and bottom edges of a T-slot opening where I use the lower part of the tool to do the top and the upper part of the tool to do the lower inside edges.  Hopefully I am being clear enough. Sun, 06 Sep 2015 20:02:10 GMT CGPM 2015-09-06T20:02:10Z