topic Re: Lighting Analysis Results Trouble in Lighting & Solar Analysis Forum

Lighting Analysis Results Trouble

mpowell_arch — Thu, 21 Feb 2019 17:34:28 GMT

I have been running daylight analysis multiple time with success on this model, but recently I noticed it has an error and I run a new analysis, and it appears to show in my online gallery, and then I get an email when complete, but it never shows on the list when I go to load it back in and display it in the model. Are these errors related? what is going on?

Thanks,

Matt

After running new analysisdetails of following error

Re: Lighting Analysis Results Trouble

scheerd — Thu, 21 Feb 2019 18:32:13 GMT

Likely those are related. What is your exact process for recreating this error?

David

Re: Lighting Analysis Results Trouble

mpowell_arch — Thu, 21 Feb 2019 21:40:51 GMT

Hi,

This is the results of analysis.

You might be interested in this Screencast:

Lighting Analysis Results Trouble

INsight360 not saving daylight results after sync and close and re-open.

https://forums.autodesk.com/t5/lighting-solar-analysis-forum/lighting-analysis-results-trouble/m-p/8612103/highlight/true

https://autode.sk/2U1SDce

-------------------------------------------------

Capture and Share Your Expertise

Autodesk Screencast lets you capture your workflows to easily create powerful and

engaging learning materials. For more information visit:

https://screencast.autodesk.com/

Re: Lighting Analysis Results Trouble

mpowell_arch — Thu, 21 Feb 2019 21:46:14 GMT

https://autode.sk/2U1SDce

Re: Lighting Analysis Results Trouble

mpowell_arch — Thu, 21 Feb 2019 21:47:44 GMT

https://autode.sk/2tz16Ia

Re: Lighting Analysis Results Trouble

mpowell_arch — Mon, 10 Jun 2019 21:04:00 GMT

This error popped up again. I think it was after a revit crash when I I had a recent analysis loaded. now it appears that the command is left incomplete.

Re: Lighting Analysis Results Trouble

mpowell_arch — Mon, 10 Jun 2019 21:28:00 GMT

How do I clear a transaction error?

Re: Lighting Analysis Results Trouble

scheerd — Tue, 11 Jun 2019 01:13:20 GMT

A transaction error is some problem with the addin.

Can you send the log files from <mydocs>/Autodesk/RevitDaylighting to david.scheer@autodesk.com?

Also the html error report you saved.

Also be sure you're using the latest version of the addin (v4.01) from https://insight360.autodesk.com/oneenergy/Landing/Download

Thx

David

Re: Lighting Analysis Results Trouble

scheerd — Thu, 18 Jul 2019 20:06:37 GMT

Important notes about changes to handling of glazing materials for Insight Lighting v4+ are available at the post below:

https://forums.autodesk.com/t5/lighting-solar-analysis-forum/critical-update-glazing-materials-for-l...

Insight version 4.031 is available here:

When updating to this new version, be sure to check your Glazing materials per the post above

https://insight360.autodesk.com/oneenergy/Landing/Download