topic Re: Network License Not Available in Inventor Programming Forum

Network License Not Available

brent_e_barbour — Mon, 01 Oct 2018 17:11:32 GMT

I just upgraded a network version of Inventor 2018 to 2019. When I launch it for the first time after the install I get “Network License Not Available.” I’m using “2080@server name” as directed. I tried using both the server name and the IP address. I generated a new license file using both the server name and the IP address. I used the inventor install on the server to verify the license manager is current and it indicates it’s already installed. Nothing I try works.

Re: Network License Not Available

bradeneuropeArthur — Mon, 01 Oct 2018 17:14:02 GMT

Same issue here.
Update your inventor server to 2019.
With all updates....

Re: Network License Not Available

brent_e_barbour — Mon, 01 Oct 2018 17:32:18 GMT

What update? The Autodesk Desktop App doesn't see any updates so I presume my workstation is up to date. The "server" only has 2019.1 Vault Basic (server) and the license manger (LM) on it. I don't see a way to check for updates in LM nor do I see LM updates in my subscription account.

Re: Network License Not Available

bradeneuropeArthur — Mon, 01 Oct 2018 17:36:38 GMT

FLEXlm licence manager to the new version and it will be accepted.

This afternoon we solved it this way...

Re: Network License Not Available

brent_e_barbour — Mon, 01 Oct 2018 17:48:10 GMT

Is FLEXlm different from LMtools by Flexera Software used for 2018? When using the Inventor 2019 CD on the server, the setup utility says the License Manager is already installed so I assume it's the same. If not, where can I find FLEXlm?

Re: Network License Not Available

bradeneuropeArthur — Mon, 01 Oct 2018 18:07:28 GMT

Have you updated the LM?
Seems to be the same FLEXlm licence manager and your LM!

Re: Network License Not Available

brent_e_barbour — Mon, 01 Oct 2018 18:31:52 GMT

As I said earlier, I'm not seeing any updates. If you know of any I'm not seeing, please share where I can get them. What version of FLEXlm are you up to? Mine is below...

Re: Network License Not Available

bradeneuropeArthur — Mon, 01 Oct 2018 18:35:17 GMT

Need to check tomorrowmorning.
Is that fine for you?

Re: Network License Not Available

brent_e_barbour — Mon, 01 Oct 2018 18:45:27 GMT

Your help is greatly appreciated! If you need to get back to me tomorrow morning, I look forward to your response. Meanwhile, I'm going to continue you work at it because there's not much else I can do until my Inventor is back up. Thank you!

Re: Network License Not Available

brent_e_barbour — Mon, 01 Oct 2018 19:27:20 GMT

Going on bradeneurope's suggestion, I saw no way to update the LMtool (or FLEXlm?). So, I uninstalled it and reinstalled the version provided in the Inventor 2019 install utility. A later version of the LMtool was installed. Everything seems to be working properly now. Thanks for your help bradeneurope!

Re: Network License Not Available

bradeneuropeArthur — Mon, 01 Oct 2018 19:32:13 GMT

@brent_e_barbour

Your thanks are appreciated very much.

This is exactly what we have done this afternoon.

Good to hear that it was solved and that it was that simple.

Regards,

Autodesk Software: Inventor Professional 2018 | Vault Professional 2018 | Autocad Mechanical 2018
Programming Skills: Vba | Vb.net (Add ins Vault / Inventor, Applications) | I-logic
Dimension Component! | Partlist Export! | Derive I-properties! | Vault Prompts Via API! | Vault Handbook/Manual!
Drawing Toggle Sheets! | Vault Defer Update!

! For administrative reasons, please mark a "Solution as solved" when the issue is solved !