iLogic: .GLB export issue on Inventor Server

talal_shahidAFKNS — Fri, 23 May 2025 11:41:32 GMT

Hi,

I am trying to export the .glb file format in inventor using iLogic. I have written the required code and it is working fine when i run it on my PC. However, when i use the same code to generate .glb file on "Inventor Server", the exported .glb file does not show all of the components which are present inside my assembly file. I have used 2 different approaches to export the .glb file (by using "Save As" command and by using the "Translators") and both of them seem to be working fine on the local run but don't seem to produce the desired results when run on "Server". Anyone can help me with this? Below is my code to create .glb file using the "Translators".

Dim odoc As Document
Dim ocompdef As ComponentDefinition
odoc = ThisDoc.Document
ocompdef = odoc.ComponentDefinition
Dim oOBJ As TranslatorAddIn
	For Each oAppAddin As ApplicationAddIn In ThisServer.ApplicationAddIns
		' MsgBox(oAppAddin.AddInType)
		If oAppAddin.DisplayName = "Translator: glTF" Then
			'  MsgBox(1)
			oOBJ = oAppAddin
		End If
	Next

	'The following lines create the needed input variables
	Dim oTO As TransientObjects = ThisServer.TransientObjects
	Dim oContext As TranslationContext = oTO.CreateTranslationContext
	oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism
	Dim oOptions As NameValueMap = oTO.CreateNameValueMap
	Dim oDataMedium As DataMedium = oTO.CreateDataMedium

	Dim tDoc As Inventor.Document = ThisDoc.Document

	savePath = ThisDoc.WorkspacePath & "\"

	oBaseName = GLB_PREFIX & CStr(FAN_SIZE) & "_" & Parameter("JOB_NUMBER")
oDataMedium.FileName = System.IO.Path.ChangeExtension(savePath & oBaseName, ".glb")
oOBJ.SaveCopyAs(odoc, oContext, oOptions, oDataMedium)
ThisDoc.Document.SaveAs(savePath & saveName & ".GLB", True)

Re: iLogic: .GLB export issue on Inventor Server

bradeneuropeArthur — Fri, 23 May 2025 12:11:06 GMT

The parameters are not declared:

Re: iLogic: .GLB export issue on Inventor Server

talal_shahidAFKNS — Sat, 24 May 2025 09:02:14 GMT

Here i have only provided the section of the code which is responsible for generating the .glb file. parameters are declared in the upper portion of the code. Also, the code is working fine locally so it can't be an issue with the parameters.

topic iLogic: .GLB export issue on Inventor Server in Inventor Programming Forum

iLogic: .GLB export issue on Inventor Server

Re: iLogic: .GLB export issue on Inventor Server

Re: iLogic: .GLB export issue on Inventor Server