topic Re: iLogic To Create Custom Parameters That Match User Defined Parameters in Inventor Programming Forum

iLogic To Create Custom Parameters That Match User Defined Parameters

fsnyderE8767 — Wed, 13 Nov 2024 21:03:41 GMT

Hi,

I'm not sure if i am going about this the correct way, but what I am trying to do is create a custom TEXT property that matches the value of a user defined property.

Say I have a property called "Force_Extend" and it's values are 4000 lbforce, but I want to make a custom text property without the underscore called "Force Extend." If I do the following code

iProperties.Value("Custom", "Force Extend") = Parameter("Force_Extend")

and then open the properties, it created a new property called "Force Extend" but the value is not 4,000 and it is not Text. The value is a crazy number 1544354.3307086611 and the type is Number.

Is there a way to make the "Force Extend" custom property say 4000 as a Text type?

Re: iLogic To Create Custom Parameters That Match User Defined Parameters

Michael.Navara — Thu, 14 Nov 2024 07:18:44 GMT

If you want to use iLogic for this, you need to convert internal value to the required units.

'Get parameter value in internal units ' iLogic 'Dim forceExtendValueInDbUnits = Parameter.Param("Force_Extend").Value ' Standard API Dim part As PartDocument = ThisDoc.Document Dim forceExtendValueInDbUnits = part.ComponentDefinition.Parameters("Force_Extend").Value 'Convert value to required units. Internal units for force is "kg*cm/s/s" Dim forceExtendValueInLbforce = ThisDoc.Document.UnitsOfMeasure.ConvertUnits(forceExtendValueInDbUnits, "kg*cm/s/s", "lbforce") 'Use result Logger.Debug(forceExtendValueInLbforce) iProperties.Value("Custom", "ForceExtend") = forceExtendValueInLbforce.ToString()

Re: iLogic To Create Custom Parameters That Match User Defined Parameters

fsnyderE8767 — Thu, 14 Nov 2024 13:11:35 GMT

Thanks Michael, that worked great! I'll be honest, I kind of understand what you did, but where did the kg*cm/s/s come from? I would like to have this same rule done to convert PSI to text as done with the lbforce but I'm lost on to how you started with those units.

Re: iLogic To Create Custom Parameters That Match User Defined Parameters

Michael.Navara — Thu, 14 Nov 2024 14:30:51 GMT

This strange units becomes from definition of basic unit for force Newton (N) and units used internally in Inventor.

N = kg * m * s-2 because Inventor uses internal unit for length centimeter, you can construct the internal unit for force as kg * cm * s-2 and because you can't use power in units definition you get kg*cm/s/s.

The same you can do for psi. Pressure is defined as psi = lbforce/in2. In SI units it is Pa = N/m2 => internal units for pressure is kg/cm/s/s.