topic Re: ilogic Configurator for Model eventually to configure Drawing. in Inventor Programming Forum

ilogic Configurator for Model eventually to configure Drawing.

RaySWE — Mon, 05 Jan 2026 20:02:19 GMT

Hello all,

Currently making an ilogic configurator to use on Models specifically assemblies. Currently

just working on one assembly configurator at the moment. With that said, I have a small idea of what the next steps would be to bring over a model to a drawing as the company I work for has a drawing package.

I am curious about how I can or should tie an assembly over to a drawing package in order to minimize or eliminate mundane tasks for Mech Engineers?

What would a good solid recommended way be of doing this to connect an assembly configured by a configurator to then be tied in to a drawing package.

I know this might be vague and to anyone asking for more detail please do, because context matters.

As a new forum member I'm excited to be here and to learn from you all. 🙂

Design Automation | Drawing Automation

Re: ilogic Configurator for Model eventually to configure Drawing.

bradeneuropeArthur — Tue, 06 Jan 2026 21:34:49 GMT

Maybe create a multi-sheet drawing with for example:

Sheet 1 the assembly and the built up "Arrangement"

Sheet 2 and further the piece parts mono drawings.

Use this complete as a template (Assembly, Parts, drawings).

Use Copy Design for creating variants/versions of this design.

Re: ilogic Configurator for Model eventually to configure Drawing.

marcin_otręba — Wed, 07 Jan 2026 11:48:23 GMT

I would use update model reference in existing assembly drawing functionality togheter with re-scaling of views.

Drawing must be prepared correctly - fully consterained section lines attached to valid geometry, the same - attached detail views, good views and dimmensions arrangement to minimalize user work, connected with drawing checker to inform user if any error occured.