topic Re: Inventor API in IDW files in Inventor Programming Forum

Inventor API in IDW files

isocam — Wed, 23 Nov 2005 14:29:55 GMT

Can anybody tell me if Inventors API can be applied to a IDW file. I have created a large vba application, using Anton Van Buitens help, that can extract hole data
(eg Depth, Diameter, Thread Size etc etc) from an IPT file but I would like to apply it to the IDW file. If you create a hole table in an IDW file, Inventor prompts you to select a datum point. I want to do a similar thing except, once I have selected the Datum point, I want to be able to run a VBA macro that can extract the hole data to a ascii text file. This would not be confined to holes but would also be used to extract iFeature details (eg insertion point, angles etc)

Can the above be done?

Can anybody help????

Kind Regards

Darren

Re: Inventor API in IDW files

Anonymous — Wed, 23 Nov 2005 17:04:08 GMT

Just guessing, but I would suspect that you should look at the DrawingView
Object Members. I would imagine you are going to have to figure out how to
convert the point in the IDW to the proper point on the part in the ipt
file.

I could be way off though??

Say hi to Anton, and tell him not to be such a stranger ;~)

--
Kent Keller
Autodesk Discussion Forum Facilitator

wrote in message news:5021231@discussion.autodesk.com...
Can anybody tell me if Inventors API can be applied to a IDW file. I have
created a large vba application, using Anton Van Buitens help, that can
extract hole data
(eg Depth, Diameter, Thread Size etc etc) from an IPT file but I would like
to apply it to the IDW file. If you create a hole table in an IDW file,
Inventor prompts you to select a datum point. I want to do a similar thing
except, once I have selected the Datum point, I want to be able to run a VBA
macro that can extract the hole data to a ascii text file. This would not be
confined to holes but would also be used to extract iFeature details (eg
insertion point, angles etc)

Can the above be done?

Can anybody help????

Kind Regards

Darren

Re: Inventor API in IDW files

Anonymous — Mon, 28 Nov 2005 18:26:52 GMT

Hello,
If the issue is accessing the geometry in the drawing view, the Inventor API
does not currently support that. However, drawing view geometry access is a
high priority for the Inventor API.
Thank you,
Clare
Autodesk, Inc.

"Kent Keller" wrote in message
news:5021456@discussion.autodesk.com...
Just guessing, but I would suspect that you should look at the DrawingView
Object Members. I would imagine you are going to have to figure out how to
convert the point in the IDW to the proper point on the part in the ipt
file.

I could be way off though??

Say hi to Anton, and tell him not to be such a stranger ;~)

--
Kent Keller
Autodesk Discussion Forum Facilitator

wrote in message news:5021231@discussion.autodesk.com...
Can anybody tell me if Inventors API can be applied to a IDW file. I have
created a large vba application, using Anton Van Buitens help, that can
extract hole data
(eg Depth, Diameter, Thread Size etc etc) from an IPT file but I would like
to apply it to the IDW file. If you create a hole table in an IDW file,
Inventor prompts you to select a datum point. I want to do a similar thing
except, once I have selected the Datum point, I want to be able to run a VBA
macro that can extract the hole data to a ascii text file. This would not be
confined to holes but would also be used to extract iFeature details (eg
insertion point, angles etc)

Can the above be done?

Can anybody help????

Kind Regards

Darren

Re: Inventor API in IDW files

maxim.teleguz — Sat, 11 Dec 2021 21:09:31 GMT

here you can:

Dim odim As DrawingDimension Line1 : 'odim = ThisApplication.CommandManager.Pick(SelectionFilterEnum.kDrawingDimensionFilter, "Select Dimension") odim = ThisApplication.CommandManager.Pick(SelectionFilterEnum.kAllEntitiesFilter, "Select Dimension") If odim Is Nothing Then Exit Sub Else odim.Precision = 3 If TypeOf odim Is HoleThreadNote = True Then Dim oHNote As HoleThreadNote = odim MsgBox(oHNote.FormattedHoleThreadNote, , "") a = InputBox("","FormattedHoleThreadNote", oHNote.FormattedHoleThreadNote) 'still testing 'oHNote.FormattedHoleThreadNote = "<HoleProperty HolePropertyID='kHoleDiameterHoleProperty' Precision='3' AlternatePrecision='3'</HoleProperty>" End If End If GoTo Line1