https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767616#M157278 It will work if fillet is suppress Tue, 19 Sep 2006 17:44:20 GMT Anonymous 2006-09-19T17:44:20Z https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767612#M157274 After adding a fillet the range box output found wrong. See the attached image. thickness of plate (Z value) is still 20mm where as range box returns 20.3. Why it is chaging. Is there any other method to get it correct Tue, 19 Sep 2006 09:53:16 GMT https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767612#M157274 Anonymous 2006-09-19T09:53:16Z https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767613#M157275 saseendrankombath,<BR /> <BR /> Can you post the part. I would like to try it in my iProperty editor. To see if my box range does the same.<BR /> <BR /> Wayne Tue, 19 Sep 2006 10:28:57 GMT https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767613#M157275 Anonymous 2006-09-19T10:28:57Z https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767614#M157276 The Part Tue, 19 Sep 2006 15:35:51 GMT https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767614#M157276 Anonymous 2006-09-19T15:35:51Z https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767615#M157277 Interesting....same problem (see attached). If you suppress the mandrel seat loft, then it works correctly.<BR /> Wayne Tue, 19 Sep 2006 16:15:36 GMT https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767615#M157277 Anonymous 2006-09-19T16:15:36Z https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767616#M157278 It will work if fillet is suppress Tue, 19 Sep 2006 17:44:20 GMT https://forums.autodesk.com/t5/inventor-programming-forum/range-box-output/m-p/1767616#M157278 Anonymous 2006-09-19T17:44:20Z