topic Re: Ilogic form in Inventor Programming Forum

Ilogic form

linuskotte — Tue, 24 Sep 2013 12:02:14 GMT

Hi to all,

Here I have some doubts on ilogic form.

Here my doubt is I entered If i entered COLUMN values like If i entered COLUMN 1 to 3 If i entered COLUMN:1 then i want to disable 2nd column and 3rd column values automatically, If If i entered COLUMN:2 third one is automatically hide or disable.

Is it possible in ilogic form?

Please help me.

Thanks in advance.

Thanks & Regards,

LINUS KOTTE

Re: Ilogic form

Vladimir.Ananyev — Tue, 24 Sep 2013 19:55:52 GMT

That's just an idea. You may split your complicated form into 3 simpler forms. Then you may open the Form2 or Form3 depending on the COLUMN value in the Form1. This coud be done from iLogic rule.

Re: Ilogic form

Anonymous — Tue, 24 Sep 2013 20:12:20 GMT

If I understand correctly, the answer is yes. You will need to create two boolean (True/False) parameters that is defined by your column parameter. Then use the two paramaters to control the "Enabling Parameter Name" property for the second and third column data. See my attached example. Hope that helps.

Dan

Re: Ilogic form

Anonymous — Tue, 24 Sep 2013 20:18:40 GMT

BTW, this only works if the form's Predefined Buttons is set to Done or None. With Done and None, ilogic rules will run automatically when a values is changed while Ok Cancel and Ok Canel Apply do not until Ok or Apply is pressed.

Re: Ilogic form

linuskotte — Wed, 25 Sep 2013 10:20:08 GMT

Thankyou danvang for your reply.

Thanks & Regards,

LINUS KOTTE

Re: Ilogic form

linuskotte — Thu, 26 Sep 2013 12:17:24 GMT

Hi,

Here i have some problem giving condition in ilogic is when iam selected COLUMN:1 then 2nd column value is 0 and same way in COLUMN:2 2nd column value is user choice it's 1 or 2.

how to give condition for this?

iam try to giving this condition like this but it's not working.

If COLUMNS = 1 Then
Vertical_com2 = 0
Vertical_com3 = 0
End If
If COLUMNS = 2 Then
Vertical_com2 = 1 Or 2
Vertical_com3 = 0
End If

here result is in 2nd column is 3

thanks & regards,

LINUS KOTTE

please solve my problem

Re: Ilogic form

Anonymous — Fri, 27 Sep 2013 16:13:15 GMT

Are the Vertical_com2 and Vertical_com3 parameters True/False parameters or are they numeric parameters?

Re: Ilogic form

linuskotte — Mon, 30 Sep 2013 08:43:16 GMT

It's a nimeric parameter 1,2

Re: Ilogic form

Anonymous — Mon, 30 Sep 2013 13:28:23 GMT

The parameter that controls the settings in the form must be a True/False parameter. See the example that I attached before. That should help explain a few things.

Dan

Re: Ilogic form

linuskotte — Mon, 30 Sep 2013 18:10:42 GMT

Hi danvang thanks for responding my query.

Here i will explain clearly in your attachment is useful for when parameter false condition box in read only it's in true condition box in editable .

But here ur solution is true but here scenario is different when iam using false conditon 2nd box box in read only and in true condition value depends on user choice it's 1 or 2, but iam trying using if condition it's not working.

If COLUMNS = 1 Then
Vertical_com2 = 0
Vertical_com3 = 0
End If
If COLUMNS = 2 Then
Vertical_com2 = 1 Or 2
Vertical_com3 = 0
End If

Here problem is not read only and editable problem is when iam selecting column:1 then 2nd column should be 0 and Column :2 then second column value is user choice it should be 1 or 2.

I think ur understood now if any mistakes in my english sorry please understand my problem

Thanks & regards,

LINUS KOTTE

Re: Ilogic form

Anonymous — Mon, 30 Sep 2013 20:05:39 GMT

Ok I think I understand now. You want to set values to 0 when they are not enable or in use? You are very close. You have the local already. You will just have to add those parameter values in the same rule that controls the true/false parameters. I've attached my sample with the adjustments. Is this what you are looking for?

The only thing is when Column is 2, you need to decide if the default value for Vertical_Com2 will be 1 or 2.

Dan

Re: Ilogic form

linuskotte — Tue, 01 Oct 2013 13:43:34 GMT

HI danvang your solution is ok but i want different solution like in my user interface like this .

in my UI 2nd column box is drop down box when iam select COLUMN: 2 then 2nd COLUMN value should be user choice only 1 or 2. If iam selecting COLUMN 1 then 2ND COLUMN should be only 0 , Thats why iam keeping in 2nd column combo box only 1 and 2 values and iam writing condition like this then when COLUMN 1, 2ND column automatically in 0, that's why in above UI showing 0 values but when iam clicking 2ND COLUMN combo box only 1 and 2 are activated.

If COLUMNS = 1 Then
Vertical_com2 = 0
Vertical_com3 = 0
End If
If COLUMNS = 2 Then
Vertical_com2 = 1 Or 2
Vertical_com3 = 0
End If

Thanks & Regards,

LINUS KOTTE

Re: Ilogic form

Anonymous — Tue, 01 Oct 2013 13:58:39 GMT

Alright. One more crack at this. See the attached file. you will need to use the MaultValue.Setlist code snippet.

Re: Ilogic form

linuskotte — Tue, 01 Oct 2013 16:36:28 GMT

Thankyou very much danvang this is what iam asking.

thanks & Regards,

LINUS KOTTE

Re: Ilogic form

Anonymous — Sun, 24 Aug 2014 14:25:06 GMT

Hello,

This is in regards with query of Ilogic functionality of Inventor I have an assembly file say “xyz.iam” and corresponding drawing file by name “xyz.dwg” Now I am going make dimension changes in assembly file “xyz.iam”, as we know that these changes will propagate to “xyz.dwg” as well.

My query is, whenever I make dimensional changes in “xyz.iam”, illogic have to ask me to rename or change the name of drawing sheet.

I am aware of itrigger option.

Please let me know the sample illogic code to perform the above mentioned operation

Thanking you in anticipation.