topic Re: How to Hide Planes & Sketches... in Inventor Programming Forum

How to Hide Planes & Sketches...

BeKirra — Mon, 13 May 2024 23:38:38 GMT

Edit: Obviously I am talking about iLogic.

1st of all, I did a search in the forum and found threads discussed this topic.

However, my situation may be slightly different.

Here is what I am after.

Looking for a way to untick all features in "Objects Visibility" in View tab (see snapshot below).
Also hide those features mentioned above in locked files (e.g. they are not checked out from vault) in Assembly level.

Can it be done?

Thanks in advance.

Re: How to Hide Planes & Sketches...

BM_Ashraf — Tue, 14 May 2024 07:27:53 GMT

Hi @BeKirra

Hope this code helps you to control the objects Visibility!

Dim oDoc As Document = ThisApplication.ActiveDocument
Dim oBJVis As ObjectVisibility = oDoc.ObjectVisibility
oBJVis.AllWorkFeatures = False
oBJVis.ConstructionSurfaces = False
oBJVis.Sketches = False
oBJVis.Sketches3D = False
oBJVis.SketchDimensions = False
oBJVis.Annotations3D = False

Re: How to Hide Planes & Sketches...

BeKirra — Wed, 15 May 2024 01:57:56 GMT

Thanks. It is great!

It'd be much helpful if the "Welds" and "Weldment Symbols" can also be unticked.

Re: How to Hide Planes & Sketches...

BM_Ashraf — Wed, 15 May 2024 02:02:56 GMT

Sure,

Dim oDoc As Document = ThisApplication.ActiveDocument
Dim oBJVis As ObjectVisibility = oDoc.ObjectVisibility
oBJVis.AllWorkFeatures = False
oBJVis.ConstructionSurfaces = False
oBJVis.Sketches = False
oBJVis.Sketches3D = False
oBJVis.SketchDimensions = False
oBJVis.Annotations3D = False
oBJVis.WeldmentSymbols = False
oBJVis.Welds = False

Re: How to Hide Planes & Sketches...

BeKirra — Wed, 15 May 2024 02:58:41 GMT

Thanks again. 😀